Cart0items

Cart

Hello GuestFor better experience login
Login

Buy Toyota Parts, Volkswagen Parts, Honda Parts, Jaguar Parts, BMW Parts, Audi Parts, Skoda Parts, Volvo Parts, Mahindra Parts, Mini Parts and more - Buy Car Parts Online!

  • 00
  • 00
  • 00
  • 00
0
0
Cart0items

Cart

HomeShopEngine & ComponentsEmission / Exhaust ComponentsPierburg Rheinmetall Germany EGR Valve for MINI Hatch 5-Door (F55) B47 Diesel Engines – 7.04493.17.0

Description

Buy Pierburg MINI F55 B47 EGR Valve 7.04493.17.0 Online India | JK Automotive

Buy Pierburg MINI F55 B47 EGR Valve 7.04493.17.0 for selected MINI Hatch 5-Door (F55) Cooper SD 2.0-litre diesel engines. Manufactured by Pierburg Rheinmetall Germany, this 12V electrically operated valve controls exhaust gas recirculation. It helps regulate combustion temperatures and supports the original nitrogen oxide emissions-control system.

The Pierburg EGR control valve responds to commands from the engine management system. It regulates the quantity of exhaust gas returning to the intake during suitable operating conditions. A correctly matched replacement can help restore normal EGR operation when the existing component has failed.

Common EGR valve problems include engine warning lights, hesitation, rough idling and reduced acceleration. Carbon deposits, electrical faults and internal mechanical wear may interfere with normal operation. Before choosing to Buy Pierburg MINI F55 B47 EGR Valve, confirm the original fault through professional diagnosis.

Pierburg part number 7.04493.17.0 has MINI OE comparison references including 11718513132, 11718580442, 11718594492 and 11719886715. Relevant B47 applications include selected Cooper SD 163 hp and 170 hp diesel versions. Verify the vehicle VIN, original equipment number and engine configuration before purchasing.

JK Automotive supplies Pierburg Rheinmetall Germany automotive replacement components for MINI diesel vehicles. This valve requires an energized installation procedure using the appropriate diagnostic service function to prevent internal gearing damage. Buy Pierburg MINI F55 B47 EGR Valve 7.04493.17.0 Online India after confirming vehicle compatibility and arranging qualified installation.

Compatible vehicles

ManufacturerModelYear-Range
MINIHatch 5-Door (F55)2015–2024

Reviews

There are no reviews yet.

Be the first to review “Pierburg Rheinmetall Germany EGR Valve for MINI Hatch 5-Door (F55) B47 Diesel Engines – 7.04493.17.0”

Your email address will not be published. Required fields are marked *

Questions and Answers

What is the Pierburg Rheinmetall Germany EGR Valve 7.04493.17.0 for MINI Hatch 5-Door (F55) B47 diesel engines?
The Pierburg Rheinmetall Germany EGR Valve 7.04493.17.0 is an electrically operated exhaust gas recirculation control valve for compatible MINI diesel engine applications, including selected MINI Hatch 5-Door (F55) Cooper SD vehicles equipped with the B47 engine. EGR stands for Exhaust Gas Recirculation. It is an important part of the diesel engine's original emissions-control system. The valve regulates the quantity of exhaust gas that returns to the engine's intake system during selected operating conditions. This process helps control combustion temperatures and reduce nitrogen oxide emissions. The B47 engine is a four-cylinder turbocharged diesel engine that uses electronic engine management. The engine control unit coordinates fuel injection, intake airflow, turbocharger operation and exhaust emissions. The EGR control valve responds to commands from this system. When recirculation is required, the valve changes its position to allow the intended exhaust gas flow. The amount of recirculation varies according to operating conditions such as engine speed, load and temperature. The valve does not remain fully open throughout normal driving. Instead, its movement is controlled according to the manufacturer's engine calibration. Pierburg 7.04493.17.0 is specified for electrical operation in a 12V system. It is a defined replacement component rather than a universal EGR valve. In the F55 model range, the relevant B47 diesel applications are selected Cooper SD versions. Published catalogue listings include 163 hp and 170 hp configurations. Both B47 C20 A and B47 C20 B engine designations appear in application information. However, the engine code alone is not sufficient to guarantee fitment. Production differences and original equipment references should also be considered. An EGR valve that fails to move correctly can interfere with the engine's intended emissions-control strategy. Possible symptoms include an engine warning light, hesitation, rough idling and reduced acceleration. Electrical faults or carbon deposits may contribute to incorrect operation. Similar symptoms can also arise from intake sensors, damaged wiring or other components. Diagnosis should therefore establish whether the valve itself requires replacement. The original MINI OE reference must be compared with the Pierburg number. Buyers should verify the VIN and installed engine before ordering. This Pierburg valve also has a special installation requirement involving electrical activation of the actuator before fitting. Correct identification and professional installation help restore the original EGR function without making unsupported promises about improved engine power or mileage.

Which MINI Hatch 5-Door (F55) B47 diesel variants are compatible with Pierburg EGR Valve 7.04493.17.0?
Pierburg EGR Valve 7.04493.17.0 is listed for selected MINI Hatch 5-Door (F55) Cooper SD diesel applications. The relevant engine family is the B47, with a displacement of 1,995 cc. Catalogue information identifies B47 C20 A and B47 C20 B engine designations. Two power outputs commonly shown for the F55 Cooper SD are 120 kW, equivalent to approximately 163 hp, and 125 kW, equivalent to approximately 170 hp. These versions are important because the F55 range also includes smaller diesel engines. The MINI One D and Cooper D listings may be associated with the 1.5-litre B37 engine. Those vehicles should not be described as B47-equipped simply because an aftermarket catalogue lists the same Pierburg component for certain B37 applications. The original engine designation must be confirmed before selecting the replacement. Published catalogue application periods vary, so a registration year by itself is not enough to determine compatibility. Different markets may also have different emissions specifications. The original MINI equipment part number is therefore essential. Pierburg 7.04493.17.0 has published OE comparison references including 11718513132, 11718580442, 11718594492 and 11719886715. These numbers help identify whether the original installed valve corresponds to the replacement. However, an OE comparison reference does not establish that every Cooper SD uses the exact same valve. Some vehicles may have production-specific restrictions or revised components. The manufacturer's VIN-based parts catalogue should be consulted for the individual vehicle. The existing valve's identification number can also support verification. Electrical connector design should be checked where necessary. The mounting arrangement and sealing surfaces must match the original installation. A component that looks similar may have different internal specifications. The EGR control valve should also be distinguished from the EGR cooler and associated bypass components. A fault in the wider EGR system does not automatically mean that the control valve has failed. A technician should identify the actual defective component before replacement. Customers ordering through JK Automotive can provide their VIN, engine code and original EGR part number. These details help establish whether Pierburg 7.04493.17.0 is the correct replacement for their MINI F55 Cooper SD. Once the application is confirmed, the specialized actuator installation procedure must be followed.

How does Pierburg EGR Valve 7.04493.17.0 function in the MINI F55 B47 diesel engine?
Pierburg EGR Valve 7.04493.17.0 regulates the recirculation of exhaust gas in compatible MINI F55 B47 diesel engine applications. Diesel engines generate power by compressing intake air and injecting fuel into the combustion chamber. This combustion process also produces exhaust gases containing pollutants. One group of pollutants is nitrogen oxides, which can form in greater quantities at high combustion temperatures. Exhaust gas recirculation helps control their formation by returning a measured amount of exhaust gas to the intake system. The recirculated gas changes the intake mixture and helps moderate combustion temperatures. The engine control unit determines the required level of EGR operation. It uses information from engine sensors and the current operating conditions. These may include engine speed, temperature, load and air-mass readings. The EGR valve receives an electrical command from the engine management system. Its actuator adjusts the valve opening to regulate gas flow. Different driving conditions require different valve positions. During some light-load conditions, more exhaust gas recirculation may be appropriate. At other operating points, the system may reduce recirculation to maintain the necessary fresh-air supply. The EGR cooler and associated passages form part of the wider recirculation system. Cooling the recirculated exhaust gases can support the intended emissions-control operation. The turbocharger and intake controls also influence the amount of air available for combustion. These systems must operate together correctly. Carbon deposits may accumulate within the EGR circuit over time. Excessive deposits can restrict the valve's movement or the surrounding passages. Electrical faults can also prevent the actuator from responding correctly. A valve stuck open may introduce too much exhaust gas into the intake at unsuitable times. A valve stuck closed may prevent the recirculation required by the control system. Both conditions can produce diagnostic trouble codes. A technician should inspect the valve, wiring and relevant operating data before deciding to replace it. Pierburg 7.04493.17.0 has an additional actuator-positioning requirement during installation. The correct diagnostic service function must be used before the new valve is fitted into the cooler assembly. Once correctly matched and installed, the component supports the engine's original emissions-control function rather than acting as a performance upgrade.

What are the common symptoms of a faulty EGR valve in a MINI Hatch 5-Door (F55) B47 diesel engine?
A faulty EGR valve in a MINI Hatch 5-Door (F55) equipped with a B47 diesel engine can produce several symptoms involving engine response and emissions-control operation. One common sign is an illuminated engine management warning light. The engine control unit may store diagnostic trouble codes when it detects unexpected EGR flow or electrical operation. The driver may experience hesitation during acceleration. Reduced engine response can occur when the proportion of fresh intake air and recirculated exhaust gas differs from the intended level. Some vehicles may develop rough or unstable idling. An EGR valve stuck open can allow excessive exhaust gas into the intake system. This may interfere with normal combustion under certain operating conditions. A valve stuck closed can prevent the required recirculation process. This may result in emissions-related faults even when the vehicle remains driveable. In more significant fault conditions, the engine management system may restrict available power. Drivers may notice reduced acceleration or a protective operating mode. However, reduced power is not exclusive to EGR valve failure. Turbocharger problems, intake leaks and fuel injection faults can produce similar symptoms. Some drivers may notice changes in fuel consumption. Fuel economy alone is not a reliable indicator of a defective EGR valve. Exhaust smoke may also appear under certain engine fault conditions. However, smoke can have several possible causes, including injector and airflow problems. Carbon deposits may prevent the EGR valve from moving smoothly. A damaged electrical connector may interrupt actuator operation. Wiring defects can also produce EGR-related fault codes. The EGR cooler and connected passages may contribute to similar diagnostic complaints. A qualified technician should therefore begin with a diagnostic examination. Stored fault codes should be interpreted alongside available live engine data. Electrical connections and the valve's operation may need testing. If mechanical or electrical failure is confirmed, a replacement may be necessary. Pierburg 7.04493.17.0 is listed for selected F55 Cooper SD B47 applications. The vehicle VIN and original OE part number must be confirmed before ordering. Incorrect fitting can also damage this valve, so its energized installation procedure is particularly important. A correctly selected and installed replacement can help resolve a confirmed EGR fault but cannot repair unrelated engine problems.

When should Pierburg EGR Valve 7.04493.17.0 be replaced in a MINI F55 Cooper SD B47 diesel engine?
Pierburg EGR Valve 7.04493.17.0 should be considered for replacement when proper diagnosis confirms that the existing EGR valve in a compatible MINI F55 Cooper SD B47 diesel engine is defective. There is no universal fixed mileage interval that applies to every EGR valve used in this engine family. The valve operates in an environment exposed to hot exhaust gases and combustion byproducts. These conditions can contribute to soot accumulation and component wear. The rate of deterioration can vary depending on vehicle usage, engine condition and the performance of related systems. Some vehicles may experience valve problems earlier than others. Higher mileage by itself does not prove that replacement is necessary. An illuminated engine warning light is a reason to inspect the emissions-control system. Hesitation, unstable idling and reduced acceleration may also justify diagnosis. However, these symptoms can originate from other engine components. The technician should begin by reviewing stored diagnostic trouble codes. The valve's electrical connector and wiring should be checked. Available diagnostic functions may help establish whether the actuator responds to commands. The surrounding EGR passages should also be inspected where restrictions are suspected. Carbon deposits can sometimes interfere with valve movement. Cleaning may be appropriate in selected cases where the valve remains mechanically and electrically serviceable. However, cleaning cannot reliably repair damaged gearing, failed electronic components or severe mechanical wear. A valve that fails functional testing may require replacement. The condition of the EGR cooler and associated components should also be considered. Installing a new valve without correcting an unresolved blockage or electrical problem may leave the original fault unchanged. When replacement is justified, the correct part should be selected using the original MINI OE reference and VIN. Pierburg 7.04493.17.0 is a relevant option only for confirmed matching applications. Its installation procedure is especially important because the actuator must be energized before the valve is fitted into the cooler module. Forcing installation in the wrong position can damage the new component. A qualified technician should perform the repair with suitable diagnostic equipment. Post-installation checks should verify correct operation and the absence of leaks or remaining fault codes. Replacing the valve based on a confirmed fault helps avoid unnecessary expense while maintaining the intended emissions-control function.

Can a faulty Pierburg EGR Valve 7.04493.17.0 affect performance, fuel consumption and emissions in a MINI F55 B47 diesel engine?
A faulty EGR valve can influence the driving performance, fuel consumption and exhaust emissions of a MINI Hatch 5-Door (F55) equipped with a compatible B47 diesel engine. The exhaust gas recirculation system regulates the amount of exhaust gas returning to the intake during selected operating conditions. Its main function is to control combustion temperatures and reduce nitrogen oxide formation. When the EGR valve operates correctly, the engine control unit regulates gas flow according to the original manufacturer calibration. If the valve becomes stuck open, excessive exhaust gas may enter the intake when more fresh air is required. This can interfere with combustion efficiency at certain operating points. Drivers may notice reduced acceleration or hesitation. The engine may also idle roughly under certain conditions. A severe malfunction can cause the engine management system to limit available power. If the valve remains closed when recirculation is requested, the engine may not achieve its intended emissions-control operation. The control system may detect this condition and store diagnostic trouble codes. A dashboard warning light may then appear. Some EGR faults develop gradually as carbon deposits accumulate. Others may occur because of electrical actuator problems or damaged wiring. These different causes can produce similar symptoms. Fuel consumption may change when the EGR system is malfunctioning. However, there is no fixed percentage increase that applies to every defective valve. Fuel economy is affected by driving habits, engine load, road conditions, fuel injection and turbocharger operation. Reduced fuel efficiency alone does not establish that the EGR valve is responsible. Faulty sensors or restrictions in the intake system may create similar complaints. Problems with the diesel particulate filter can also influence engine operation. A technician should therefore review the wider engine-management system before deciding on replacement. Diagnostic testing can help establish whether the EGR valve is responding to commands correctly. Electrical connections and surrounding passages may require inspection. If the installed valve is confirmed defective, a compatible replacement can help restore normal exhaust gas recirculation. Pierburg 7.04493.17.0 is catalogued for selected MINI F55 Cooper SD B47 applications. The exact VIN and original part number should be verified before purchase. Installation must also follow Pierburg's special energized fitting procedure. Replacing the valve is intended to restore the original emissions-control operation, not to guarantee increased horsepower or fuel economy.

How can I verify Pierburg EGR Valve 7.04493.17.0 compatibility using the VIN and OEM number of my MINI Hatch 5-Door (F55)?
The most reliable method of identifying the correct EGR valve for a MINI Hatch 5-Door (F55) is to check the vehicle VIN and original equipment part number. The VIN identifies the vehicle's original configuration and provides a basis for retrieving manufacturer parts information. It can help establish the exact model, engine code and applicable replacement components. This is important because the MINI F55 was produced with different diesel engine configurations. Selected Cooper SD models use the 2.0-litre B47 diesel engine. The relevant engine designations include B47 C20 A and B47 C20 B. Catalogue listings for these versions include 163 hp and 170 hp outputs. However, other F55 diesel variants use the 1.5-litre B37 engine. The B37 and B47 engines should not be confused when creating a vehicle-specific product listing. Although Pierburg 7.04493.17.0 appears in some catalogues for both engine families, compatibility must be confirmed for the individual vehicle. The original EGR valve reference should be obtained through MINI or BMW parts information. Published OE comparison numbers include 11718513132, 11718580442, 11718594492 and 11719886715. These references can help establish whether the vehicle's original component corresponds to Pierburg 7.04493.17.0. If the original number differs, the manufacturer catalogue should be checked for a verified replacement or supersession. A different number should not automatically be assumed interchangeable. The electrical connector must correspond to the installed wiring harness. The mounting design and sealing surfaces should also match the original installation. Similar-looking valves can have different control characteristics. The EGR control valve should also be distinguished from the EGR cooler and related components. A diagnostic trouble code associated with exhaust gas recirculation does not always mean the valve itself has failed. Electrical problems, restricted passages and other system faults may require separate attention. Customers purchasing through JK Automotive can provide their VIN, engine identification and existing EGR part number. A photograph showing the original component's identification label may provide additional assistance. Once the original equipment requirement is confirmed, Pierburg 7.04493.17.0 can be evaluated as the correct replacement. This process helps reduce incorrect purchases and unnecessary installation delays.

What special installation precautions must be followed when fitting Pierburg EGR Valve 7.04493.17.0 on a MINI F55 B47 engine?
Pierburg EGR Valve 7.04493.17.0 has a manufacturer-specific installation requirement that must be followed to avoid damaging the component. Pierburg's Service Information SI 1597 explains that this electrically operated valve must be installed in an energized condition. The actuator's internal gearing can be damaged if the valve is forced into the EGR cooler assembly while de-energized. This makes proper diagnostic equipment an important requirement for the repair. Before beginning, the technician should confirm that the replacement corresponds to the original MINI equipment reference. The vehicle VIN and engine code should also be checked. The engine must be allowed to cool before work begins. EGR components operate near hot exhaust passages and can remain hot after driving. Suitable protective equipment and workshop safety procedures should be used. The exact removal process should follow the MINI manufacturer's service instructions. Access may require removing engine covers, intake ducts or nearby components. Electrical connectors should be released carefully without damaging their retaining clips or terminals. The wiring harness should be inspected for corrosion, loose connections or damaged insulation. The surrounding area should also be checked for exhaust leakage and excessive carbon accumulation. During removal, loose deposits must not be allowed to enter open passages. The valve mounting surfaces should be inspected for damage. Any required seals or gaskets should be prepared according to the applicable installation instructions. The technician must then follow the specified actuator-positioning procedure using a suitable diagnostic tester. The relevant EGR replacement service function should be selected according to the vehicle's diagnostic system. The actuator must reach the installation position required by the manufacturer's procedure. Only then should the valve be fitted into the cooler assembly. The technician must not force the component into place if resistance indicates an incorrect actuator position. Fasteners should be tightened according to the specified workshop procedure. All removed electrical connectors, ducts and brackets must be refitted correctly. Any applicable electronic adaptation or initialization procedure should also be completed. The engine should be checked for leaks and abnormal operation after installation. Stored fault codes should be reviewed using the diagnostic tester. A road test and post-repair inspection can help confirm that the original problem has been resolved. Because incorrect fitting can damage the internal gearing, professional installation with appropriate diagnostic equipment is strongly recommended.

Why should customers consider Pierburg Rheinmetall Germany EGR Valve 7.04493.17.0 for MINI F55 Cooper SD B47 diesel engines?
Pierburg Rheinmetall Germany is an established manufacturer of automotive components associated with engine management and emissions-control systems. Pierburg 7.04493.17.0 is a specifically identified electrically operated EGR control valve. Its manufacturer reference allows workshops to compare the product with the original MINI equipment number. This is particularly useful for MINI Hatch 5-Door (F55) vehicles because the model range includes different diesel engine configurations. Selected Cooper SD applications equipped with the B47 diesel engine are listed for this valve. Published catalogues identify 163 hp and 170 hp versions with B47 C20 A or B47 C20 B engine codes. These details provide a starting point for replacement-part identification. However, the VIN and original OE number should still be checked. Pierburg 7.04493.17.0 has published comparison references including 11718513132, 11718580442, 11718594492 and 11719886715. The exact reference required for an individual vehicle should be confirmed through manufacturer parts information. A recognized component manufacturer can be valuable when accurate technical identification and installation information are available. Pierburg also provides a specific technical instruction for this EGR valve. Its actuator must be energized before fitting into the cooler assembly to avoid internal gearing damage. This installation guidance is particularly important for workshops performing the repair. The valve's purpose is to regulate exhaust gas recirculation according to engine management commands. When the existing component is defective, a correctly matched replacement can help restore normal system operation. However, brand reputation alone does not guarantee correct vehicle fitment. A diagnostic inspection should establish that the EGR valve itself requires replacement. Faults involving wiring, sensors or blocked passages may cause similar symptoms. The EGR cooler may also need separate inspection if leakage or other damage is suspected. Customers should verify that the delivered product matches the manufacturer part number on their order. Packaging and the valve should be inspected for visible damage before installation. The correct seals and mounting components should be confirmed. Professional fitting and diagnostic checks are important for obtaining the intended repair result. JK Automotive customers can provide the vehicle VIN and original EGR reference for compatibility verification. For a confirmed matching MINI F55 Cooper SD B47 application, Pierburg 7.04493.17.0 is a relevant replacement option. Its benefit is the restoration of intended EGR operation rather than an unsupported promise of increased engine power.

Why is Pierburg considered a suitable EGR valve brand for MINI F55 B47 diesel engines compared with Delphi, BorgWarner and other replacement brands?
Pierburg Rheinmetall, Delphi and BorgWarner are established automotive component suppliers associated with different engine-management and vehicle technology products. When comparing EGR valves for a MINI Hatch 5-Door (F55) B47 diesel engine, the first consideration should always be exact compatibility. Pierburg 7.04493.17.0 is a defined electrically operated EGR control valve with published original equipment comparison references. It appears in replacement-parts catalogues for selected F55 Cooper SD B47 applications. This provides a useful foundation for identifying a suitable replacement. However, an EGR valve from another manufacturer should not be treated as interchangeable merely because it looks similar. The electrical connectors may differ. Internal actuator characteristics may also be different. Mounting points, valve dimensions and sealing requirements must correspond to the original installation. The vehicle VIN should therefore be used to establish the original equipment specification. The existing MINI part number should then be compared with the manufacturer's catalogue. Pierburg 7.04493.17.0 is associated with references including 11718513132 and 11719886715. Other published references may also apply, subject to individual vehicle requirements. A Delphi, BorgWarner or other aftermarket alternative should only be selected when its exact part number is verified for the same original equipment application. Product authenticity is also important. Buyers may compare manufacturer documentation, warranty terms, included accessories and local availability after compatibility has been confirmed. The supplied installation instructions may influence the choice of component. Pierburg provides an important energized installation requirement for this particular valve. Incorrect fitting can damage the internal gearing even when the replacement is otherwise suitable. A cheaper product is not an acceptable replacement if its specifications do not match the original valve. Equally, a higher-priced component is not automatically more reliable. There is no sound basis for claiming that Pierburg is universally superior to Delphi, BorgWarner or every other EGR manufacturer. Each manufacturer may offer appropriate components for particular engine applications. A customer should first establish whether the EGR valve has actually failed. Wiring problems, sensor faults and intake restrictions may require different repairs. For a confirmed compatible MINI F55 B47 application, Pierburg 7.04493.17.0 is a documented replacement option. JK Automotive customers should provide their VIN and original part number before ordering. Choosing a genuine, correctly specified part and following the prescribed installation procedure are more important than unsupported brand superiority claims.


Still have questions?

Ask a question

Recently viewed products