Is Bilstein B4 Rear Shock Absorber With Boots, Buffers and Mountings 24-296267 compatible with my Mercedes-Benz W213 E-Class?
Bilstein B4 Rear Shock Absorber 24-296267 is engineered as a genuine OEM replacement rear suspension kit for compatible Mercedes-Benz W213 E-Class models equipped with the Long Length / Tall Height suspension configuration. This complete Bilstein suspension kit includes 2 genuine Bilstein B4 rear shock absorbers, dust boots, bump stops (buffers) and upper mountings, allowing you to replace all major rear suspension wear components in one installation. Manufactured in Germany using Bilstein's advanced gas-pressure technology, this kit restores the original ride comfort, suspension stability, handling precision and driving characteristics specified by Mercedes-Benz. It replaces OEM part numbers A2133200930 and A2133204501, ensuring factory-quality fitment without requiring any modification. Since Mercedes-Benz offered multiple suspension options depending on engine variant, wheelbase, equipment level and production year, it is always recommended to verify your VIN number or compare the original OEM part numbers fitted to your vehicle before ordering. Installing the complete Bilstein B4 suspension kit restores proper suspension damping, reduces suspension noise, improves braking stability, enhances tyre contact with the road and delivers the refined, comfortable and safe driving experience expected from the Mercedes-Benz W213 E-Class while extending the service life of the entire rear suspension assembly.
Which Mercedes-Benz OEM part numbers does Bilstein 24-296267 replace?
Bilstein 24-296267 is manufactured as a direct OEM replacement for Mercedes-Benz original part numbers A2133200930 and A2133204501 fitted to selected Mercedes-Benz W213 E-Class models equipped with the Long Length / Tall Height rear suspension. These OEM references correspond to factory-installed rear suspension assemblies designed specifically for particular W213 suspension configurations. Verifying your original Mercedes-Benz OEM part number or confirming compatibility using your VIN remains the safest and most accurate method to ensure correct fitment because different W213 variants may use different suspension systems depending on production date, engine specification and optional equipment. Bilstein engineers every B4 suspension kit to match the original dimensions, mounting points, damping characteristics and suspension geometry, allowing direct installation while restoring factory ride comfort, suspension performance, handling precision and long-term durability expected from genuine Mercedes-Benz replacement suspension components.
Why does this Bilstein B4 kit include boots, buffers and mountings along with the rear shock absorbers?
Bilstein B4 24-296267 is supplied as a complete rear suspension service kit because replacing only the shock absorbers while reusing old suspension components can reduce the lifespan and overall performance of the new dampers. This kit includes new dust boots, bump stops (buffers) and upper mountings, all of which are essential wear components that deteriorate with age and mileage. The dust boots protect the polished shock absorber shaft from dirt, moisture and road debris, preventing premature seal damage and extending shock absorber life. The bump stops absorb heavy suspension compression and prevent internal damage when the suspension reaches maximum travel, while the upper mountings isolate vibration, minimise suspension noise and securely support the shock absorbers within the vehicle. Replacing all these components together ensures the entire rear suspension operates as Mercedes-Benz originally intended, improves ride comfort, reduces future maintenance costs, eliminates unwanted suspension noises and maximises the performance, reliability and service life of the new Bilstein B4 rear shock absorbers.
Should the complete rear suspension kit be replaced together instead of only the shock absorbers?
Yes. Mercedes-Benz and Bilstein strongly recommend replacing the complete rear suspension assembly whenever major suspension components have reached the end of their service life. Replacing only the rear shock absorbers while retaining worn dust boots, bump stops or upper mountings can lead to premature wear of the new dampers, increased suspension noise, reduced ride comfort and inconsistent suspension performance. Installing the complete Bilstein B4 kit ensures every major rear suspension wear component is renewed simultaneously, restoring balanced damping performance, improved braking stability, better tyre contact with the road, smoother ride quality and quieter suspension operation. Replacing both rear shock absorbers together as a matched pair also prevents uneven suspension characteristics across the rear axle while reducing labour costs associated with multiple repairs in the future. This complete suspension solution helps restore the factory driving characteristics of the Mercedes-Benz W213 E-Class while ensuring maximum durability and long-term reliability.
What are the common signs that my Mercedes-Benz W213 rear shock absorbers, mountings or bump stops need replacement?
As rear suspension components wear with age and mileage, several symptoms begin to appear that indicate replacement is necessary. Common warning signs include excessive bouncing after driving over speed breakers, knocking or rattling noises from the rear suspension, visible oil leakage from the shock absorbers, cracked or damaged dust boots, deteriorated bump stops, worn upper mountings, excessive rear body movement during braking or acceleration, uneven rear tyre wear and a noticeable reduction in ride comfort. Drivers may also experience poor road holding, reduced stability during cornering and increased vibration inside the cabin. Ignoring these symptoms can accelerate wear on springs, suspension arms, tyres and other suspension components while reducing overall driving safety. Replacing the complete Bilstein B4 Rear Shock Absorber Kit with new boots, buffers and mountings restores factory suspension performance, eliminates unwanted suspension noise, improves handling stability and returns the Mercedes-Benz W213 to its original smooth, comfortable and refined driving characteristics.
Is Bilstein B4 24-296267 an OEM replacement rear suspension kit?
Yes. Bilstein B4 24-296267 is engineered specifically as a genuine OEM replacement complete rear suspension kit for compatible Mercedes-Benz W213 E-Class models. It is manufactured to meet or exceed original Mercedes-Benz suspension specifications while maintaining the factory ride height, suspension geometry, damping characteristics and driving comfort. Unlike aftermarket performance suspension upgrades that alter handling or reduce ride height, Bilstein B4 components are designed solely to restore the original suspension performance developed by Mercedes-Benz engineers. The kit includes premium-quality rear shock absorbers together with new boots, bump stops and upper mountings manufactured using precision engineering and high-quality materials to deliver consistent damping performance, exceptional durability and long service life. This makes Bilstein B4 one of the most trusted OEM replacement suspension solutions available for maintaining factory ride quality and long-term reliability.
Why buy Bilstein B4 Rear Shock Absorber With Boots, Buffers and Mountings 24-296267 from JK Automotive?
JK Automotive is one of India's trusted suppliers of genuine European automotive spare parts and specialises in OEM-quality replacement components for Mercedes-Benz, BMW, Audi, Porsche, Volkswagen, Volvo, Jaguar and Land Rover vehicles. Purchasing Bilstein B4 Rear Shock Absorber Kit 24-296267 from JK Automotive guarantees genuine Bilstein Germany suspension products sourced through trusted distribution channels, ensuring complete authenticity, factory-quality performance and long-term reliability. Customers also benefit from expert technical guidance, VIN compatibility verification, OEM part number confirmation, competitive pricing, fast nationwide shipping, secure packaging and dependable after-sales support. Our experienced technical team helps customers select the correct suspension kit before purchase, ensuring compatibility with the exact Mercedes-Benz W213 suspension configuration while providing complete confidence in product quality, professional assistance and long-term customer satisfaction.
How does Bilstein B4 Rear Shock Absorber Kit 24-296267 improve the ride quality and handling of the Mercedes-Benz W213 E-Class?
Bilstein B4 Rear Shock Absorber Kit 24-296267 restores the original suspension performance of the Mercedes-Benz W213 E-Class by replacing not only the rear shock absorbers but also the essential suspension wear components including dust boots, bump stops and upper mountings. This complete suspension renewal ensures factory-equivalent damping performance, significantly improving ride comfort, suspension stability, braking performance, road holding and overall driving confidence. The advanced Bilstein gas-pressure technology keeps the rear tyres in continuous contact with the road surface, reducing excessive body movement during acceleration, braking and cornering while improving passenger comfort and vehicle control. The inclusion of new boots protects the shock absorber shafts from contaminants, new bump stops safeguard the dampers during heavy suspension compression and new mountings eliminate vibration and suspension noise. Together, these components restore the smooth, refined and comfortable driving characteristics originally engineered into the Mercedes-Benz W213 while providing the durability, precision engineering and OEM-quality reliability for which Bilstein Germany is recognised worldwide.
Reviews
There are no reviews yet.