Is Bilstein B4 Front Shock Absorber 24-295406 compatible with my Mercedes-Benz W213 E-Class?
Bilstein B4 Front Shock Absorber 24-295406 is engineered as a genuine OEM replacement front suspension strut for compatible Mercedes-Benz W213 E-Class models equipped with the Long Length / Tall Height suspension configuration. Manufactured in Germany using Bilstein's advanced gas-pressure technology, this front suspension set is designed to restore the original ride comfort, steering precision, suspension stability and driving characteristics specified by Mercedes-Benz. It replaces OEM part numbers A2133201730, A2133203730 and A2133203613, ensuring precise factory fitment without requiring any modifications during installation. Since Mercedes-Benz offered multiple front suspension variants depending on engine specification, trim level, production year, suspension package and optional equipment, it is always recommended to verify your VIN number or compare the original OEM part number fitted to your vehicle before ordering. Installing genuine Bilstein B4 Front Shock Absorbers restores factory suspension damping, improves steering response, enhances braking performance, maintains maximum tyre contact with the road and delivers the smooth, refined and comfortable driving experience expected from the Mercedes-Benz W213 E-Class while preserving the original suspension geometry engineered by Mercedes-Benz.
Which Mercedes-Benz OEM part numbers does Bilstein 24-295406 replace?
Bilstein 24-295406 is manufactured as a direct OEM replacement for Mercedes-Benz original part numbers A2133201730, A2133203730 and A2133203613 fitted to selected Mercedes-Benz W213 E-Class models with the Long Length / Tall Height front suspension setup. These OEM references correspond to factory-installed front suspension struts used on specific W213 suspension configurations depending on production period, engine type and equipment level. Verifying your original Mercedes-Benz OEM part number or confirming compatibility using your VIN is the safest and most accurate method to ensure correct fitment because different W213 variants may use different front suspension assemblies. Bilstein engineers every B4 Front Shock Absorber to match the original mounting dimensions, damping characteristics and suspension geometry, allowing direct installation while restoring factory ride comfort, steering precision, suspension performance and long-term durability expected from genuine Mercedes-Benz replacement suspension components.
Why should I choose Bilstein B4 Front Shock Absorbers instead of cheaper aftermarket shock absorbers?
Bilstein B4 Front Shock Absorbers are developed specifically for Mercedes-Benz owners who want to restore the original factory suspension performance without changing ride height or handling characteristics. Unlike many inexpensive aftermarket shock absorbers that often compromise damping quality, ride comfort and long-term durability, Bilstein B4 dampers are manufactured in Germany using premium materials, precision engineering and advanced gas-pressure technology developed through decades of original equipment manufacturing experience. Bilstein is recognised worldwide as one of the leading OEM suspension manufacturers and supplies suspension systems to many premium European automotive brands. The B4 range provides factory-equivalent damping performance, precise steering response, improved braking stability, exceptional road holding and reduced body roll while maintaining the original suspension geometry engineered by Mercedes-Benz. Choosing genuine Bilstein B4 Front Shock Absorbers ensures outstanding reliability, excellent durability and the refined balance between comfort and driving dynamics originally developed for the Mercedes-Benz W213 E-Class, making them one of the most trusted OEM replacement suspension solutions available.
Should both front shock absorbers always be replaced together?
Yes. Mercedes-Benz and Bilstein strongly recommend replacing both front shock absorbers together because suspension dampers naturally wear at similar rates throughout the vehicle's service life. Installing only one new front shock absorber while leaving the opposite side worn creates uneven suspension damping, negatively affecting steering response, braking efficiency, tyre wear, vehicle balance and overall handling characteristics. Replacing both Bilstein B4 Front Shock Absorbers as a complete matched pair restores balanced suspension performance across the front axle, improves cornering stability, enhances tyre contact with the road surface and delivers smoother ride quality under all driving conditions. Simultaneously replacing both dampers also reduces unnecessary stress on springs, control arms, suspension bushes, ball joints and steering components while maximising the lifespan of the new suspension parts. For optimum safety, comfort and long-term reliability, Bilstein recommends replacing both front shock absorbers together to restore the original suspension characteristics engineered by Mercedes-Benz.
What are the common signs that my Mercedes-Benz W213 front shock absorbers need replacement?
As front shock absorbers wear with age and mileage, they gradually lose their ability to control suspension movement effectively, leading to noticeable changes in driving behaviour. Common symptoms include excessive bouncing after driving over speed breakers or uneven roads, knocking or clunking noises from the front suspension, oil leakage from the shock absorber body, poor steering response, increased body roll while cornering, excessive front-end dive during braking, uneven front tyre wear and a significant reduction in ride comfort. Drivers may also notice increased steering vibration, reduced stability at motorway speeds and less confidence during emergency braking or sudden lane changes. Continuing to drive with worn front shock absorbers may accelerate wear on tyres, suspension bushes, steering components and wheel alignment while reducing overall driving safety. Replacing worn suspension dampers with genuine Bilstein B4 Front Shock Absorbers restores factory suspension performance, improves steering precision, enhances braking stability and returns the Mercedes-Benz W213 E-Class to its original smooth, comfortable and refined driving characteristics.
Is Bilstein B4 24-295406 an OEM replacement front shock absorber?
Yes. Bilstein B4 24-295406 is engineered specifically as a genuine OEM replacement front shock absorber for compatible Mercedes-Benz W213 E-Class models and is manufactured to meet or exceed original Mercedes-Benz suspension specifications. It maintains the factory ride height, suspension geometry, damping characteristics and driving comfort originally developed by Mercedes-Benz engineers. Unlike performance suspension upgrades that intentionally alter vehicle handling or lower the ride height, Bilstein B4 dampers are designed solely to restore factory suspension performance. Manufactured using premium materials, precision engineering and advanced gas-pressure technology, every Bilstein shock absorber delivers consistent damping performance, exceptional durability and long service life. This makes Bilstein B4 one of the most trusted OEM replacement suspension products available for Mercedes-Benz owners seeking original ride quality, factory comfort and dependable long-term reliability.
Why buy Bilstein B4 Front Shock Absorbers 24-295406 from JK Automotive?
JK Automotive is one of India's trusted suppliers of genuine European automotive spare parts and specialises in OEM-quality replacement components for Mercedes-Benz, BMW, Audi, Volkswagen, Porsche, Volvo, Jaguar and Land Rover vehicles. Purchasing Bilstein B4 Front Shock Absorbers 24-295406 from JK Automotive guarantees genuine Bilstein Germany suspension products sourced through trusted distribution channels, ensuring complete authenticity, factory-quality performance and long-term reliability. Customers also benefit from expert technical assistance, OEM part number verification, VIN compatibility confirmation, competitive pricing, fast shipping across India, secure packaging and dependable after-sales support. Our experienced technical team helps customers identify the correct suspension components before purchase, eliminating compatibility concerns while providing complete confidence in product quality, professional service and customer satisfaction. Choosing JK Automotive ensures your Mercedes-Benz W213 receives genuine Bilstein suspension components backed by expert advice and reliable after-sales support.
How do Bilstein B4 Front Shock Absorbers improve the ride quality and handling of the Mercedes-Benz W213 E-Class?
Bilstein B4 Front Shock Absorbers restore the original suspension performance of the Mercedes-Benz W213 E-Class by delivering factory-equivalent damping characteristics specifically engineered for the vehicle's front suspension system. Their advanced gas-pressure technology maintains continuous tyre contact with the road surface, reducing excessive body movement during braking, acceleration and cornering while significantly improving steering precision, suspension stability and overall driving confidence. Compared with worn suspension dampers, new Bilstein B4 Front Shock Absorbers provide noticeably smoother ride quality, quieter suspension operation, improved braking performance, enhanced road holding and greater passenger comfort across all driving conditions. Because they are manufactured to original Mercedes-Benz specifications, they preserve the original ride height and suspension geometry while delivering precision engineering, exceptional durability, consistent damping performance and OEM-quality reliability for which Bilstein Germany is recognised worldwide. Whether driving in city traffic, on highways or during long-distance touring, Bilstein B4 Front Shock Absorbers help restore the premium driving experience, comfort and safety originally engineered into the Mercedes-Benz W213 E-Class.
Reviews
There are no reviews yet.