What is the Stokes Germany Rear Lower Control Arm Set of 4 for Volvo XC90?
The Stokes Germany Rear Lower Control Arm Set of 4 for Volvo XC90 is a complete rear suspension replacement package designed for Volvo XC90 models from 2015–2026 and corresponding to OEM references 31360588 & 31360584. This Set of 4 is intended for replacement of the specified rear lower control arm components when the original suspension arms or their integrated bushes have become worn, damaged or developed excessive movement. Rear lower control arms are important wheel-locating components within the Volvo XC90 suspension system because they help control the position and movement of the rear wheel assemblies as the suspension travels over changing road surfaces. These arms experience continuous forces during acceleration, braking, cornering and normal driving, while their bushes help permit controlled suspension articulation and isolate unwanted vibration. With increasing mileage, the original bushes may deteriorate because of repeated movement, potholes, speed breakers, moisture, heat and normal ageing. Worn bushes may develop cracking, separation, deformation or excessive play, potentially resulting in knocking or clunking from the rear suspension, reduced stability, changes in handling or abnormal rear tyre wear. The Volvo XC90 Rear Lower Control Arm Set provides four specified replacement components together, making it a convenient option when professional inspection confirms wear across multiple rear lower suspension arms. Supplying the components as a complete set can also simplify sourcing compared with purchasing the required arms separately. However, suspension symptoms should be diagnosed before replacement because similar noises or handling problems may originate from shock absorbers, springs, wheel bearings or other suspension bushes. Sway bar links, sway links, anti roll link rods and stabiliser sway links should also be inspected because wear in these components can produce similar suspension noises. Correct fitment should be verified using Volvo XC90, the 2015–2026 year range and OEM references 31360588 & 31360584. Professional installation is recommended, followed by wheel alignment to check suspension geometry after replacement.
Which Volvo XC90 models are compatible with the Stokes Germany Rear Lower Control Arm Set of 4?
The Stokes Germany Rear Lower Control Arm Set of 4 is specified for Volvo XC90 models from 2015–2026 requiring OEM references 31360588 & 31360584. Fitment should be verified using the exact vehicle details and OEM references before ordering because suspension components can appear visually similar while differing in dimensions, mounting arrangements, bush specifications or application. For this product, the supplied application should be retained exactly as Volvo XC90 2015–2026 rather than assuming compatibility with every Volvo model that uses a similar rear suspension design. OEM-reference matching provides an important method of confirming whether the replacement arms correspond to the components required on the vehicle. The Volvo XC90 Rear Lower Control Arm Set contains four specified suspension components associated with OEM references 31360588 & 31360584, providing a convenient package when several rear lower suspension arms require replacement during the same repair. These components help locate the rear wheels and manage suspension movement during braking, acceleration, cornering and travel over uneven roads. Over time, the bushes within the original control arms can deteriorate and allow unwanted movement. This may result in rear suspension knocking, clunking, changes in handling, reduced stability or irregular tyre wear. Such symptoms should not automatically be attributed to the control arms because other suspension faults can create similar behaviour. Before replacement, a qualified technician should inspect the complete rear suspension, including shock absorbers, springs, wheel bearings, suspension bushes and mounting points. Sway bar links and sway links should be checked for excessive play or damaged joints. Anti roll link rods and stabiliser sway links should also be inspected as part of the suspension diagnosis. Tyres should be checked for abnormal wear and correct pressure. Once compatibility has been verified using Volvo XC90, 2015–2026 and OEM references 31360588 & 31360584, professional installation of the Stokes Germany Set of 4 is recommended. Wheel alignment should then be performed to verify suspension geometry and help support predictable handling and consistent tyre wear.
Which OEM part numbers are included in the Volvo XC90 Rear Lower Control Arm Set of 4?
The Stokes Germany Volvo XC90 Rear Lower Control Arm Set of 4 corresponds to OEM references 31360588 & 31360584 for the specified Volvo XC90 2015–2026 application. These OEM references should be preserved exactly when identifying or ordering the product because correct part-number matching is an important step in verifying suspension compatibility. The product is supplied as a Set of 4 even though two distinct OEM references are specified, so both the four-piece quantity and the supplied OEM-reference configuration should be retained exactly as provided. OEM references 31360588 & 31360584 identify the specified rear lower suspension components represented within this Stokes Germany package. Using OEM references alongside the Volvo XC90 model and 2015–2026 year range provides a more reliable method of checking the required suspension parts than selecting components solely according to appearance. Rear lower control arms play an important role in controlling wheel position and suspension movement. Their bushes are continually subjected to movement and loading during acceleration, braking, cornering and driving over rough roads. As these bushes age, they can develop cracking, separation or excessive movement. This may lead to knocking or clunking noises from the rear suspension, changes in handling, reduced rear-end stability or irregular tyre wear. If these symptoms are present, professional inspection should be performed before ordering replacement components because similar symptoms can originate from other suspension parts. Shock absorbers should be checked for deterioration or leakage, while springs, wheel bearings and other suspension bushes should also be inspected. Sway bar links, sway links, anti roll link rods and stabiliser sway links should be examined for excessive play or damaged joints. Tyre condition and existing wheel alignment should also be assessed. Once inspection confirms that the components corresponding to OEM references 31360588 & 31360584 require replacement, the Stokes Germany Volvo XC90 Rear Lower Control Arm Set of 4 provides the specified components together for a comprehensive repair. Professional installation and post-replacement wheel alignment are recommended.
What are the symptoms of worn rear lower control arms on a Volvo XC90?
Worn rear lower control arms on a Volvo XC90 can cause a range of symptoms involving suspension noise, vehicle stability, steering behaviour and tyre wear. One possible symptom is knocking or clunking from the rear suspension when travelling over potholes, speed breakers, broken road surfaces or other irregularities. The bushes within the rear lower control arms are designed to permit controlled movement while restricting excessive wheel and suspension movement. As these bushes deteriorate, additional play may develop and reduce the precision with which the rear suspension controls the wheel assemblies. A driver may notice that the rear of the Volvo XC90 feels less settled during cornering, lane changes, acceleration or braking. Uneven or accelerated rear tyre wear can also indicate that suspension geometry or wheel control requires inspection. However, tyre wear by itself does not confirm a defective control arm because incorrect wheel alignment, worn shock absorbers, wheel-bearing problems, damaged tyres or incorrect tyre pressure can produce similar patterns. A professional suspension inspection is therefore recommended before replacement. The technician should examine the rear lower control arm bushes for cracking, separation, deformation and excessive movement while also checking the physical arms for impact damage or distortion. If deterioration is confirmed in components corresponding to OEM references 31360588 & 31360584, the Stokes Germany Volvo XC90 Rear Lower Control Arm Set provides a Set of 4 for the specified 2015–2026 application. The complete rear suspension should be examined during the same repair. Shock absorbers, springs, wheel bearings and mounting hardware should be inspected for deterioration or damage. Sway bar links and sway links should be checked because worn joints can create knocking noises that may be mistaken for control arm problems. Anti roll link rods and stabiliser sway links should also be inspected. After replacing the confirmed worn control arms, professional wheel alignment is recommended to check suspension geometry. Tyres should also be inspected because existing uneven tyre wear will not disappear simply because the suspension components have been replaced.
Why should Volvo XC90 rear lower control arms be replaced as a complete Set of 4?
Replacing the Volvo XC90 rear lower control arms as a complete Set of 4 can be beneficial when multiple original suspension arms or their bushes have accumulated similar mileage and professional inspection confirms deterioration across several components. Rear suspension arms operate continuously under similar road and vehicle loads, including forces generated by acceleration, braking, cornering, potholes, speed breakers and uneven road surfaces. Because several original suspension bushes may have been exposed to the same operating conditions for a similar period, deterioration can eventually affect more than one component. The Stokes Germany Volvo XC90 Rear Lower Control Arm Set combines four specified replacement components corresponding to OEM references 31360588 & 31360584 for Volvo XC90 models from 2015–2026. Supplying the required components together can simplify sourcing when multiple rear lower control arms need replacement and may reduce the need to order individual arms separately. A complete repair can also reduce repeated suspension dismantling when several confirmed worn components require attention at the same time. However, replacing a complete Set of 4 should be based on inspection rather than assuming that every rear suspension problem requires all four components. Each control arm and bush should be examined for excessive movement, cracking, separation, deformation or physical damage. Rear shock absorbers should be checked for leakage or deterioration, while springs and wheel bearings should be inspected for damage or excessive movement. Sway bar links, sway links, anti roll link rods and stabiliser sway links should also be checked because these components can develop wear and create similar suspension noises. Tyres should be inspected for abnormal wear and correct inflation pressure. Correct fitment should be confirmed using Volvo XC90, the 2015–2026 application and OEM references 31360588 & 31360584 before installation. Once the required components have been verified, professional installation of the Stokes Germany Set of 4 is recommended, followed by wheel alignment to check suspension geometry and help maintain stable handling and consistent tyre wear.
Is wheel alignment required after replacing the Volvo XC90 rear lower control arms?
How can the Stokes Germany Rear Lower Control Arm Set of 4 improve the rear suspension of Volvo XC90?
The Stokes Germany Rear Lower Control Arm Set of 4 is designed to replace the specified rear suspension control arms on Volvo XC90 models from 2015–2026 when the original components or their bushes have become worn, damaged or developed excessive movement. This complete Set of 4 corresponds to OEM references 31360588 & 31360584 and provides the specified rear lower suspension components together in one package. Rear lower control arms perform an important function in the Volvo XC90 suspension because they help locate the rear wheel assemblies and control their movement relative to the vehicle body. During normal driving, these components continuously experience forces created by acceleration, braking, cornering, road irregularities, potholes and speed breakers. The rubber bushes incorporated into suspension arms are designed to permit controlled articulation while helping isolate vibration and prevent excessive unwanted wheel movement. As these bushes age, repeated suspension movement and road impacts can cause cracking, deterioration, deformation, separation or excessive play. Once this wear becomes significant, the rear suspension may no longer control wheel movement as precisely as intended. Drivers may notice knocking or clunking noises from the rear, particularly when travelling over broken roads or uneven surfaces. The rear of the vehicle may also feel less settled during cornering, lane changes, acceleration or braking. Excessive movement within worn suspension bushes may contribute to changes in wheel positioning and can be associated with irregular rear tyre wear. Installing the Volvo XC90 Rear Lower Control Arm Set can help address these issues when professional diagnosis confirms that the original components corresponding to 31360588 & 31360584 are worn. The Set of 4 is particularly useful when several rear lower suspension arms have accumulated similar mileage and multiple bushes require replacement during the same repair. Replacing the confirmed worn components together can provide a more comprehensive approach than repeatedly dismantling the suspension as additional ageing components fail. However, the control arms should not automatically be assumed to be responsible for every suspension noise or handling complaint. Rear shock absorbers should be inspected for leakage, deterioration or reduced damping ability. Springs should be checked for damage, while wheel bearings should be examined for excessive movement or abnormal noise. Other suspension bushes and mounting hardware should also be inspected. Sway bar links and sway links can develop play and produce knocking sounds that may resemble control arm noise. Anti roll link rods and stabiliser sway links should therefore be checked during the same suspension inspection. Tyres should be examined for uneven wear, damage and correct inflation pressure. Correct compatibility should be confirmed using Volvo XC90, the supplied 2015–2026 year range and OEM references 31360588 & 31360584 before installation. Professional installation is recommended because correct component positioning and suspension assembly are important for the final repair. Once the new Stokes Germany Rear Lower Control Arm Set of 4 has been installed, professional wheel alignment should be performed to check the resulting suspension geometry. Correct alignment helps support predictable handling, stable tyre contact and more consistent tyre wear after the suspension repair.
Can worn Volvo XC90 rear lower control arms cause knocking noise, unstable handling and uneven tyre wear?
Yes, worn rear lower control arms or deteriorated control arm bushes on a Volvo XC90 can contribute to knocking noises, changes in rear suspension stability and uneven tyre wear because these components help control the position and movement of the rear wheel assemblies. The rear lower control arms operate continuously whenever the suspension moves, including during acceleration, braking, cornering and travel over rough or uneven road surfaces. Rubber suspension bushes allow controlled movement between the control arms and their mounting points while helping isolate vibration and restrict unwanted movement. Over time, these bushes can deteriorate because of mileage, repeated suspension articulation, road impacts, heat, moisture and normal material ageing. Cracked, separated or excessively soft bushes may allow more movement than intended. One possible symptom is a knocking or clunking sound from the rear suspension when the Volvo XC90 passes over potholes, speed breakers or broken roads. The noise may become more noticeable as bush wear increases because movement between suspension components can become greater. A driver may also notice that the rear of the vehicle feels less controlled during cornering or quick changes of direction. The vehicle may require more correction than expected or feel unsettled over uneven roads. Worn control arm bushes may also influence wheel positioning as suspension loads change. This can contribute to irregular rear tyre wear when the suspension can no longer maintain consistent geometry under driving loads. However, these symptoms are not exclusive to rear lower control arms. A knocking sound can also originate from sway bar links, sway links, anti roll link rods or stabiliser sway links. Worn shock absorber mounts, deteriorated shock absorbers, damaged springs or loose suspension hardware can produce similar noises. Wheel-bearing wear can create noise or unwanted wheel movement, while incorrect wheel alignment can independently cause abnormal tyre wear. Tyre pressure and tyre condition can also influence handling. For these reasons, a complete professional suspension inspection should be performed before ordering replacement parts. If inspection confirms deterioration in the rear lower suspension components corresponding to OEM references 31360588 & 31360584, the Stokes Germany Volvo XC90 Rear Lower Control Arm Set provides the specified Set of 4 for Volvo XC90 models from 2015–2026. Replacing multiple confirmed worn components together can be useful when the original arms have accumulated similar mileage. During installation, the surrounding suspension components should again be checked so that another worn component does not remain undetected. Tyres that have already developed severe irregular wear may still require replacement because installing new suspension arms cannot restore worn tyre tread. After fitting the Volvo XC90 Rear Lower Control Arm Set, professional wheel alignment should be performed to measure and correct suspension geometry where applicable. Combining correct diagnosis, replacement of confirmed worn components, proper installation and accurate wheel alignment provides a more complete approach to restoring rear suspension operation.
Why should OEM references 31360588 & 31360584 be checked before buying the Volvo XC90 Rear Lower Control Arm Set?
Checking OEM references 31360588 & 31360584 before purchasing the Stokes Germany Volvo XC90 Rear Lower Control Arm Set of 4 is important because suspension components should be selected according to the exact vehicle application rather than appearance alone. Modern suspension systems contain several arms, bushes and links that can look similar when viewed separately, yet differences in dimensions, mounting points, bush design or application can make visually similar components unsuitable for a particular vehicle. This Stokes Germany product is specified as a Rear Lower Control Arm Set of 4 for Volvo XC90 models from 2015–2026 with OEM references 31360588 & 31360584. These details should therefore be used together when verifying compatibility. Checking only the vehicle name without checking the OEM references can increase the possibility of selecting an incorrect suspension component. Similarly, relying only on a photograph can be unreliable because the visual differences between suspension arms may be small. OEM-reference verification provides another important identification point when comparing the replacement parts with the components required for the vehicle. Before ordering, the customer or workshop should verify Volvo XC90, the supplied 2015–2026 application and OEM references 31360588 & 31360584 against the vehicle being repaired. This becomes especially important when purchasing a complete Set of 4 because the objective is to have the required components available together when the suspension is dismantled. Discovering an incorrect component after the vehicle has been lifted and the original suspension removed can cause unnecessary workshop delays. Accurate identification can therefore save time during the repair process. OEM-number verification is also useful when suspension work has previously been performed on the vehicle because an existing component may have been replaced before. The technician should still diagnose the condition of the current suspension rather than replacing components solely because of mileage. Bushes should be inspected for cracks, separation, deformation and excessive movement. The control arms themselves should be examined for bending, impact damage or other physical deterioration. Rear shock absorbers should be checked for leakage or reduced damping performance, while springs and wheel bearings should also be inspected. Sway bar links and sway links should be checked for excessive joint movement. Anti roll link rods and stabiliser sway links should be included in the inspection because they can create knocking noises similar to those produced by worn suspension bushes. Tyres should be inspected for abnormal wear, damage and correct inflation pressure. If professional inspection confirms that the specified rear lower control arms require replacement, the Stokes Germany Volvo XC90 Rear Lower Control Arm Set of 4 provides the specified components corresponding to 31360588 & 31360584. Professional installation should then be performed using the appropriate repair procedure. Once the suspension has been reassembled, professional wheel alignment is recommended to verify geometry and help protect the tyres from avoidable irregular wear.
Why is professional installation recommended for the Stokes Germany Volvo XC90 Rear Lower Control Arm Set of 4?
Professional installation is recommended for the Stokes Germany Volvo XC90 Rear Lower Control Arm Set of 4 because rear control arms are structural wheel-locating suspension components, and correct installation is important for suspension movement, wheel positioning, handling and tyre wear. This Set of 4 is specified for Volvo XC90 models from 2015–2026 and corresponds to OEM references 31360588 & 31360584. Replacing rear lower control arms involves more than simply removing an old component and installing a new one. The vehicle must first be safely lifted and supported so the suspension can be accessed without creating unnecessary risk. Existing suspension fasteners may have been exposed to years of water, dirt, road contamination and temperature changes, which can make removal more difficult. A professional workshop has appropriate lifting equipment, suspension tools and experience to deal with these conditions. Before dismantling the suspension, a technician can also confirm which components are actually worn. This is important because knocking noises, unstable handling or irregular tyre wear can have several possible causes. The rear lower control arm bushes should be checked for cracking, separation, deformation and excessive movement. The physical arms should also be examined for impact damage or distortion. During replacement, each suspension component needs to be installed in its correct position and orientation. Mounting hardware should be inspected and handled according to the appropriate vehicle repair procedure. Bush-type suspension components can also be sensitive to their final installed position, making correct workshop procedures important for the service life and operation of the repair. Professional installation creates an opportunity to inspect surrounding components while the vehicle is lifted and the suspension is accessible. Rear shock absorbers should be checked for leakage, physical damage and deterioration. Springs should be examined for damage, and wheel bearings should be checked for unwanted movement or abnormal noise. Other rear suspension bushes should be inspected because replacing one group of components will not eliminate symptoms caused by another worn part. Sway bar links and sway links should be examined for joint wear or excessive play. Anti roll link rods and stabiliser sway links should also be checked because they can produce knocking sounds over rough roads. Tyres should be inspected for abnormal tread wear and damage, while tyre pressures should be corrected before final suspension assessment. Correct fitment of the Stokes Germany Rear Lower Control Arm Set should be verified using Volvo XC90, 2015–2026 and OEM references 31360588 & 31360584. After installation, the vehicle should not simply be returned to normal use without checking wheel geometry. Professional wheel alignment is strongly recommended because rear lower control arms influence wheel location. Alignment allows the resulting suspension geometry to be measured and adjusted where applicable. This helps support predictable handling, stable tyre contact and consistent tyre wear. Professional installation combined with wheel alignment therefore provides a more complete repair process for the Volvo XC90 Rear Lower Control Arm Set of 4.
Why is Stokes Germany a European-quality alternative to Lemförder, FEBI, Meyle and other established brands for Volvo XC90?
Reviews
There are no reviews yet.