What is the purpose of the Stokes Germany Hydraulic Filter Kit?
The Stokes Germany Hydraulic Filter Kit is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343), covering the supplied vehicle years of 2013 – 2019. Its intended purpose is to support filtration within a compatible transmission hydraulic system. Automatic and dual-clutch transmissions use specialised fluid for several operating functions. Depending on the transmission design, these functions may include lubrication, cooling and hydraulic control. The filter is intended to capture specified particulate contaminants circulating through the transmission fluid. Such contamination may include fine wear particles and other material generated during operation. Correct filtration helps maintain the intended cleanliness of the circulating fluid. This function forms part of appropriate gearbox maintenance. The hydraulic filter is different from the engine oil filter. Engine oil filters serve the engine lubrication system rather than the transmission. The product title includes OEM references A2463770395, A2463771400, A2463772400 and 31726-HG00C. These references must be checked against the vehicle's exact gearbox specification. A shared vehicle model name does not establish universal transmission filter compatibility. The VIN should therefore be checked before ordering. The transmission identification code is also important. Different gearbox variants may require different filtration components. The replacement must match the intended housing dimensions. Its sealing arrangement must also correspond to the specified design. Incorrect installation may affect the intended filtration or hydraulic function. The actual Stokes Germany product specifications should be reviewed. Customers should confirm the package contents before purchase. Gaskets, O-rings and transmission fluid should not be assumed to be included. The technician should follow the applicable Mercedes-Benz transmission service procedure. The relevant housing and sealing surfaces should be inspected. Required replacement seals should be fitted correctly. The specified transmission fluid approval must be observed. Some gearbox service procedures require temperature-dependent fluid-level checks. A filter replacement cannot repair worn clutch components. It also cannot guarantee correction of mechatronic faults. Persistent transmission symptoms require appropriate diagnosis. Correct component selection supports the intended transmission maintenance process. JK Automotive buyers should confirm the VIN and gearbox code before purchasing.
Is OEM A2463770395 compatible with Mercedes CLA200 C117?
OEM reference A2463770395 is supplied as an identification number for the listed Stokes Germany Hydraulic Filter Kit. The stated vehicle application is the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343). The supplied vehicle year range is 2013 – 2019. However, compatibility must be established using reliable transmission-specific parts information. The vehicle's exact gearbox configuration should be identified first. The VIN provides important identification information. The transmission code can provide additional confirmation. Certain CLA 200 configurations use a seven-speed dual-clutch transmission. However, the correct filter must still be selected for the installed gearbox. The reference A2463770395 should be compared with the applicable transmission parts catalogue. The product title also includes A2463771400, A2463772400 and 31726-HG00C. These references should be checked individually. Their inclusion together does not independently establish universal interchangeability. The actual Stokes Germany product specification should also be reviewed. The filter must match the designated housing dimensions. Its sealing edges should fit correctly. A visually similar filter may not provide the intended fit. The package contents should be checked for required service accessories. Transmission fluid should be selected independently of the filter reference. Engine oil must not be substituted for transmission fluid. Installation should follow the correct Mercedes-Benz gearbox service procedure. The technician should inspect the housing for damage. Required seals should be installed in their specified positions. The applicable tightening instructions should be followed. The transmission fluid should meet the required approval. Any specified temperature-dependent filling procedure must be observed. Existing gearbox fault codes should be investigated separately. A replacement filter cannot repair worn clutches or defective control components. Customers should not assume that every CLA 200 C117 uses the same hydraulic filter. VIN-based verification helps prevent incorrect orders. JK Automotive buyers should confirm the exact transmission application before purchasing.
What are the symptoms of a clogged Mercedes CLA200 hydraulic filter?
A restricted transmission hydraulic filter may affect fluid circulation when excessive contamination accumulates within its filtration media. Transmission fluid supports important functions within the gearbox. Depending on the transmission design, these functions include lubrication, cooling and hydraulic control. The filter captures specified particles carried by the fluid. During normal operation, wear material and other contamination may gradually accumulate. Excessive contamination can increase resistance to fluid flow. However, the resulting effects depend on the gearbox design. Harsh shifting may have several possible causes. Incorrect fluid level can affect transmission operation. Unsuitable transmission fluid may also create problems. Worn clutch components can produce engagement irregularities. Mechatronic faults may affect shift control. Electrical or sensor problems can produce similar symptoms. Therefore, harsh shifts do not automatically prove that the filter is clogged. The technician should review the vehicle's transmission service history. Diagnostic fault codes may provide useful information. The exact gearbox must be identified before selecting service components. The vehicle VIN should be checked. The transmission code provides additional confirmation. OEM references A2463770395, A2463771400, A2463772400 and 31726-HG00C require application verification. The actual Stokes Germany filter dimensions should match the required housing. The sealing arrangement must also be suitable. The technician should inspect the relevant housing and fluid condition. Existing leaks should be investigated. The correct transmission fluid specification must be used. Any required temperature-dependent filling procedure should be followed. The gearbox should be checked for leaks after servicing. A new filter cannot repair damaged clutch packs. It also cannot guarantee elimination of electronic fault codes. Persistent transmission symptoms may require further mechanical or electronic diagnosis. Customers should treat filter replacement as maintenance rather than a guaranteed gearbox repair.
When should the Mercedes CLA200 transmission hydraulic filter be replaced?
The transmission hydraulic filter should be serviced according to the maintenance requirements applicable to the individual Mercedes-Benz CLA Coupe C117 CLA 200. The supplied vehicle year range is 2013 – 2019. However, the correct service interval depends on the installed gearbox. The VIN should be checked to identify the transmission configuration. The transmission code can provide additional confirmation. Different gearbox designs may have different fluid and filter maintenance requirements. A service interval suitable for one transmission should not automatically be applied to another. The technician should consult the applicable Mercedes-Benz maintenance information. The vehicle's previous transmission service history should also be reviewed. Transmission fluid supports lubrication and other operating functions. Over time, the fluid may experience thermal stress and contamination. The filtration system captures specified particulate material circulating through the fluid. A filter may require replacement as part of a scheduled transmission service. However, the exact procedure depends on the gearbox design. The correct replacement should be identified before work begins. OEM reference A2463770395 should be checked against the installed transmission. Additional supplied references A2463771400, A2463772400 and 31726-HG00C require individual verification. The actual Stokes Germany kit contents should also be confirmed. Customers should not assume that fluid, gaskets or seals are included. Required service components should be obtained before draining the transmission fluid. The technician should inspect the relevant housing and sealing surfaces. Any specified replacement seals should be fitted correctly. The correct transmission fluid approval must be observed. The gearbox may require a temperature-dependent filling procedure. The final fluid level should be checked using the specified method. Diagnostic equipment may be necessary for certain service operations. Existing gearbox faults should be investigated independently. A new filter cannot repair worn clutches or damaged electronic control components. Accurate service records help support future maintenance planning. JK Automotive customers should confirm the gearbox code before ordering the hydraulic filter kit.
Why choose a Stokes Germany Hydraulic Filter Kit for Mercedes CLA200?
The Stokes Germany Hydraulic Filter Kit provides an aftermarket service option for customers maintaining a compatible Mercedes-Benz transmission. The product is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343). Its supplied vehicle year range is 2013 – 2019. The intended function is to capture specified particulate contamination within the transmission hydraulic system. Correct filtration forms part of appropriate gearbox maintenance. Transmission fluid supports lubrication and other functions according to the gearbox design. A correctly specified filter helps maintain the intended cleanliness of that fluid. However, actual filtration performance depends on verified product specifications. Customers should not assume that the kit increases engine horsepower. Smoother shifting should also not be guaranteed without diagnosing the gearbox. The supplied OEM references are A2463770395, A2463771400, A2463772400 and 31726-HG00C. These references should be checked against reliable parts information. Their inclusion does not independently prove universal interchangeability. The vehicle VIN should be used to identify the installed transmission. The gearbox code provides additional fitment information. The replacement must match the intended filter housing. Its dimensions and sealing arrangement should be suitable. The actual Stokes Germany kit specification should be reviewed before ordering. Customers should confirm the package contents and quantity. Transmission fluid should not be assumed to be included. Installation should follow the applicable Mercedes-Benz gearbox service procedure. The technician should inspect the housing and sealing surfaces. Required seals should be installed correctly. The specified transmission fluid must be used. Any temperature-dependent filling requirements should be followed. A replacement filter cannot repair worn clutches or damaged mechatronic components. Persistent transmission faults may require separate diagnosis. JK Automotive provides an online platform for automotive replacement parts in India. Customers should review current product details and availability before purchase. VIN-based verification helps reduce incorrect orders. The Stokes Germany Hydraulic Filter Kit should be selected after confirming the individual vehicle's transmission application.
Does this hydraulic filter kit fit the Mercedes CLA200 7G-DCT gearbox?
The Stokes Germany Hydraulic Filter Kit is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343), covering the supplied years 2013 – 2019. Certain CLA 200 vehicles use the Mercedes-Benz 7G-DCT dual-clutch transmission. This gearbox uses transmission-specific fluid and hydraulic components. The hydraulic filtration system is intended to capture specified particles circulating through the fluid. The product's primary reference is A2463770395. Additional references are A2463771400, A2463772400 and 31726-HG00C. JK Automotive lists this reference group for the CLA 200 application. However, the exact gearbox must be identified before installation. A shared vehicle model name does not establish the transmission specification. The VIN should be checked against reliable Mercedes-Benz parts information. The transmission identification code provides additional confirmation. The replacement should match the correct filter housing. Its dimensions must correspond to the specified component. Its sealing arrangement must also be suitable. The actual Stokes Germany kit specification should be reviewed. Customers should confirm whether the package contains additional service accessories. Transmission fluid should not be assumed to be included. The technician should inspect the relevant housing and sealing surfaces. Required replacement seals should be installed according to the service procedure. The correct gearbox fluid approval must be observed. Fluid filling requirements may depend on transmission temperature. Diagnostic equipment may be required during servicing. Existing transmission fault codes should be investigated separately. A new hydraulic filter cannot repair worn clutch assemblies. It also cannot guarantee correction of mechatronic faults. Incorrect fluid selection can create serious operating problems. The gearbox should be checked for leaks after servicing. Customers should avoid purchasing solely on the basis of the vehicle's production year. Accurate VIN and gearbox-code verification helps reduce incorrect orders. Correct component selection supports the intended transmission maintenance process.
Are A2463770395, A2463771400, A2463772400 and 31726-HG00C interchangeable?
The supplied product title contains four hydraulic filter identification references. These are A2463770395, A2463771400, A2463772400 and 31726-HG00C. JK Automotive lists this reference group together for the Mercedes-Benz CLA 200 (117.343). The same group also appears in its catalogue for selected other Mercedes-Benz models. This provides evidence of an aftermarket cross-reference relationship within the retailer's catalogue. However, a retailer cross-reference should not automatically be treated as a manufacturer-confirmed supersession. Different references may represent related components or revised applications. The exact relationship should be established through reliable transmission parts information. The actual Stokes Germany product specification must also be checked. A filter may be sold individually or as part of a service kit. Different packages may include different accessories. The quantity of filters should therefore be confirmed. Any included gaskets or seals should be identified. The correct gearbox must be established using the vehicle VIN. The transmission code should also be checked. The replacement must match the intended filter housing. Its dimensions and sealing surfaces should correspond to the required component. An incorrectly sized filter should not be installed. A visually similar product may still have an unsuitable specification. The technician should compare the replacement with authoritative parts information. The existing component can provide supporting identification details. However, a previously installed part should not be assumed correct without verification. The correct transmission fluid must be selected independently. The applicable filling procedure should be followed. Any required fluid-temperature conditions should be observed. Existing transmission faults may require separate diagnosis. JK Automotive should describe these numbers as supplied cross-references unless their official relationship is confirmed. Customers should avoid assuming universal compatibility across every CLA model. VIN-based verification provides the appropriate basis for final selection.
Does the Stokes Germany Hydraulic Filter Kit include a gasket and O-rings?
The supplied product title identifies a hydraulic filter kit but does not specify the complete package contents. Therefore, the inclusion of a gasket or O-rings must be confirmed before ordering. Transmission filter kits can contain different accessories depending on the manufacturer. Some kits include one or more sealing components. Other products may require separate seals or service hardware. An OEM reference alone does not guarantee identical packaging across brands. The actual Stokes Germany package should be checked. A manufacturer datasheet may provide further information. Customers should confirm the number of filters supplied. They should also check whether any O-rings are included. The correct gasket or seal specification depends on the transmission design. The Mercedes-Benz CLA 200 C117 may use a gearbox-specific filtration arrangement. The VIN should be checked before selecting service parts. The transmission code provides additional confirmation. OEM references A2463770395, A2463771400, A2463772400 and 31726-HG00C should be compared with the required components. The filter must match the designated housing dimensions. Its sealing arrangement must be suitable. The technician should inspect the housing before installation. Damaged sealing surfaces may require additional attention. Incorrectly sized seals should not be installed. Required seals should be fitted in their specified positions. The housing should be secured according to the applicable service instructions. The correct transmission fluid approval must be used. The gearbox may require a temperature-dependent filling procedure. The fluid level should be checked using the specified method. The transmission should be inspected for leaks after servicing. A new gasket cannot repair a cracked housing. Existing fluid leaks may require further diagnosis. Customers should obtain all required service components before maintenance begins. Confirming the kit contents helps avoid incomplete gearbox servicing.
Can replacing this hydraulic filter improve Mercedes CLA200 shifting?
Replacing a transmission hydraulic filter during an appropriate service can help maintain the intended fluid filtration function. The Mercedes-Benz CLA 200 may be equipped with a dual-clutch transmission. Such a gearbox depends on mechanical, hydraulic and electronic components. Transmission fluid supports lubrication and other functions according to the gearbox design. The filter captures specified particulate contaminants circulating through the fluid. Excessive contamination may affect the condition of the filtration system. However, replacing the filter does not guarantee smoother shifting. Harsh gear changes can have several possible causes. Incorrect fluid level may affect transmission behaviour. Unsuitable transmission fluid can also create problems. Worn clutch components may produce engagement irregularities. Mechatronic faults can affect gearbox control. Sensor or wiring problems may create similar symptoms. Therefore, shifting concerns should be diagnosed before parts are replaced. The technician should review transmission fault codes. The service history may provide useful information. The exact gearbox must be identified. The VIN and transmission code should be checked. The replacement filter should match the required housing specification. OEM A2463770395 should be verified against the installed transmission. Additional supplied references require individual confirmation. The actual Stokes Germany kit contents should also be checked. Required seals should be fitted correctly. The specified transmission fluid must be used. Any temperature-dependent filling procedure should be followed. The gearbox should be checked for leaks after servicing. Persistent symptoms may require additional diagnostic testing. A new filter cannot repair damaged clutch friction material. It also cannot restore a defective mechatronic assembly. Customers should treat hydraulic filter replacement as maintenance rather than a guaranteed gearbox repair.
Where can I buy this Mercedes CLA200 hydraulic filter kit online in India?
Customers can review the Stokes Germany Hydraulic Filter Kit through JK Automotive's online automotive spare-parts website in India. The product is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343). Its supplied vehicle year range is 2013 – 2019. The OEM references are A2463770395, A2463771400, A2463772400 and 31726-HG00C. JK Automotive's public catalogue identifies this listing as SKU ST1233. The product belongs to the transmission filtration category. Customers should confirm the exact gearbox before ordering. The vehicle VIN should be checked against reliable parts information. The transmission code can provide additional confirmation. The actual Stokes Germany kit specification should be reviewed. The replacement must match the intended filter housing. Its dimensions and sealing arrangement should be suitable. Customers should confirm whether seals or gaskets are included. Transmission fluid should not be assumed to be part of the package. Buyers can visit
https://jkautomotive.co.in/ to review the product listing. Current pricing and stock availability should be checked before checkout. Delivery options may vary according to destination. Applicable shipping charges should be reviewed during checkout. Customers should not assume a particular dispatch timeframe without confirmation. The received product should be inspected before installation. The package identification should match the verified replacement requirement. Any discrepancy should be resolved before servicing begins. The technician should follow the applicable Mercedes-Benz transmission service procedure. The specified transmission fluid and filling method must be used. Existing gearbox faults may require separate diagnosis. A new hydraulic filter cannot guarantee improved shifting performance. Customers should retain their invoice and maintenance records. Accurate fitment verification helps reduce incorrect orders and servicing delays.
Reviews
There are no reviews yet.