What is the purpose of this Stokes Germany Air Filter?
The Stokes Germany Air Filter is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343), covering the supplied vehicle years of 2013 – 2019. Its primary function is to help filter incoming air before it enters the engine combustion system. Petrol engines require a continuous supply of air for normal combustion. During everyday driving, outside air may contain dust, pollen, sand and other airborne particles. The engine air filter contains media designed to capture specified particles from the incoming airflow. This helps reduce the amount of abrasive contamination entering the intake system. Correct filtration is particularly relevant when driving in dusty environments. The filter forms part of the vehicle's engine air intake arrangement. It is different from the passenger cabin air filter. A cabin filter serves the heating and ventilation system rather than the engine. The engine air filter does not independently control fuel delivery or ignition. Its filtration capability depends on the media construction and condition. As the vehicle operates, particles gradually accumulate within the filter media. Excessive contamination can increase resistance to incoming airflow. A correctly specified replacement helps maintain the intended filtration arrangement during routine servicing. However, a new filter does not guarantee increased engine horsepower. It also cannot independently repair engine management faults. The supplied OEM reference is A2700940004. This reference should be checked against the individual vehicle's engine and airbox configuration. The vehicle identification number provides a useful starting point for parts verification. The engine code can provide additional confirmation. The actual Stokes Germany product dimensions should match the required filter. Its sealing edges must fit the designated housing correctly. An incorrectly seated element may allow unfiltered air to bypass the media. Installation should follow the applicable Mercedes-Benz service procedure. The technician should inspect the airbox for accumulated debris. The replacement should be fitted without trimming or modification. Housing covers and retaining components should be secured after installation. Existing hesitation or poor engine performance may require separate diagnosis. JK Automotive customers should confirm the VIN and OEM reference before ordering.
Is OEM A2700940004 compatible with Mercedes CLA200 C117?
OEM A2700940004 is supplied as the engine air filter reference for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343). This identifies the intended replacement application in the product title. However, the exact fitment should be confirmed against reliable Mercedes-Benz parts information. The vehicle identification number is important because model names alone may not capture every production variation. The engine code should also be checked. The CLA 200 petrol variant belongs to the Mercedes-Benz CLA C117 model family. Different engine configurations within the wider CLA range may use different air filtration components. Therefore, a filter listed for one CLA engine should not automatically be assumed suitable for another. The supplied vehicle year range is 2013 – 2019. These years are preserved exactly as provided. Nevertheless, the year range should not replace a vehicle-specific parts check. The required air filter must match the engine airbox. Its dimensions should correspond to the designated filter housing. The sealing surfaces must also fit correctly. A visually similar filter may not provide the intended fit. The existing filter can provide supporting identification information. However, a previously installed component should be verified against the parts catalogue. The actual Stokes Germany filter specification should be reviewed. Customers should compare the product reference with the required replacement. The package contents and quantity should also be confirmed. Installation should follow the appropriate Mercedes-Benz service instructions. The airbox should be inspected for debris and damage. The replacement should be seated securely. Housing covers and clips must be correctly refitted. Any disturbed intake connections should be checked. An incorrectly installed filter may allow unwanted bypass airflow. Customers should avoid selecting filters solely from vehicle photographs. The VIN and engine details provide a more reliable basis for identification. JK Automotive buyers should confirm A2700940004 against their individual vehicle before purchasing. Accurate fitment verification helps prevent incorrect orders and workshop delays.
What are the symptoms of a dirty Mercedes CLA200 air filter?
A dirty engine air filter may restrict intake airflow when excessive dust and other contamination accumulate within its filtration media. The engine requires air to support the combustion process. The air filter captures specified particles before they enter the intake system. During normal operation, airborne contaminants gradually collect within the media. The rate of contamination depends on the driving environment. Vehicles operated on dusty roads may experience faster accumulation. A heavily restricted filter can increase resistance to incoming airflow. Under certain conditions, this may contribute to reduced engine responsiveness. However, poor performance is not always caused by a dirty filter. A defective intake sensor may affect engine operation. Ignition system faults can also cause hesitation. Fuel delivery problems may produce similar symptoms. Turbocharger-related faults can affect a turbocharged CLA 200 engine. Therefore, the technician should not assume that every performance complaint requires an air filter replacement. The existing filter should be inspected for contamination. Its sealing edges should also be checked for damage. The airbox should be inspected for accumulated debris. Loose intake connections may create additional problems. Engine diagnostic fault codes may provide useful information. The correct replacement should be identified using the VIN. OEM reference A2700940004 should be checked against the vehicle's engine configuration. The actual Stokes Germany product dimensions must match the specified housing. An incorrectly sized filter should not be installed. The replacement should be fitted without modification. The technician should prevent loose debris from entering the intake system during servicing. Housing covers and retaining clips should be secured. Any disturbed intake connections should be checked after installation. Persistent hesitation or poor acceleration should be diagnosed separately. A new filter cannot repair a defective sensor or turbocharger. Correct filtration maintenance helps maintain the intended engine air intake function.
When should the Mercedes CLA200 air filter be replaced?
The engine air filter should be inspected and replaced according to the maintenance schedule applicable to the individual Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343). The supplied vehicle year range is 2013 – 2019. However, the correct replacement interval should be established using the vehicle's maintenance information. The VIN and engine code can help identify the applicable service requirements. The vehicle's maintenance history may indicate when the filter was last replaced. Air filters gradually accumulate dust and other particles during normal engine operation. The rate of contamination depends on environmental conditions. Driving on dusty roads may increase particle accumulation. Construction areas and unpaved surfaces can expose the intake system to additional contaminants. More frequent inspection may be reasonable under severe operating conditions. However, an arbitrary shortened interval should not be presented as an official Mercedes-Benz requirement. The technician should inspect the existing filter according to the applicable service procedure. Visible contamination may support the decision to replace it. Torn filtration media may also require attention. Damaged sealing edges can compromise the intended filtration arrangement. The airbox should be inspected for debris and damage. The correct replacement must be identified before installation. OEM A2700940004 should be verified against the individual engine application. The actual Stokes Germany filter dimensions should match the designated housing. The replacement should not be trimmed or modified to fit. Any required airflow orientation should be observed. The airbox should be closed securely after installation. Retaining clips and disturbed intake connections should be checked. A new air filter does not guarantee improved fuel economy. It also cannot repair unrelated ignition or fuel system faults. Persistent engine performance complaints may require separate diagnosis. Customers should retain their maintenance records. Regular inspection helps identify when the filter requires replacement. Correct servicing supports the intended engine intake filtration function. JK Automotive buyers should confirm the VIN before ordering.
Why choose a Stokes Germany Air Filter for Mercedes CLA200?
The Stokes Germany Air Filter provides an aftermarket replacement option for customers maintaining a compatible Mercedes-Benz engine intake system. The product is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343). Its supplied year range is 2013 – 2019. The filter is intended to capture specified airborne particles entering the engine air intake. Correct filtration helps reduce the entry of dust and other abrasive contamination. This function forms part of normal engine maintenance. The actual filtration performance depends on the product's verified technical specifications. Customers should not assume that the filter guarantees increased engine power. Improved fuel economy should also not be promised without supporting evidence. The appropriate benefit is maintaining the intended intake filtration arrangement. The supplied OEM reference is A2700940004. This reference should be checked against the vehicle's engine configuration. The VIN provides a reliable starting point for verification. The engine code can offer additional confirmation. The replacement must match the required airbox dimensions. Its sealing edges should fit the housing correctly. An incorrectly installed filter may permit unfiltered air to bypass the media. The actual Stokes Germany product specifications should be reviewed before ordering. Customers should confirm the package contents and quantity. Installation should follow the applicable Mercedes-Benz service instructions. The technician should inspect the airbox for dust and damage. The replacement should be seated securely without modification. Housing covers and retaining clips should be refitted correctly. Existing engine faults may require separate diagnosis. A new filter cannot repair a defective ignition system or turbocharger. JK Automotive provides an online platform for automotive spare parts in India. Customers should review current product details and availability before purchase. VIN-based verification helps reduce incorrect orders. The Stokes Germany Air Filter should be selected after confirming the individual vehicle's engine application. Correct identification helps support efficient and appropriate vehicle maintenance.
Does this air filter fit the Mercedes M270 petrol engine?
The Stokes Germany Air Filter is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343), equipped with the M270 petrol engine family. The CLA 200 117.343 application is identified in established filter catalogues with the M270.910 engine. This engine has a displacement of 1595 cc. It is a turbocharged petrol engine used in the first-generation CLA 200. The supplied vehicle year range is 2013 – 2019. MANN-FILTER lists the corresponding CLA 200 application across this model period. The product's OEM reference is A2700940004. Mercedes-Benz identifies this reference as an engine air filter element for selected vehicles in the CLA 117 series. This provides useful support for the intended product application. However, the final replacement must still match the individual vehicle's requirements. The VIN should be checked before ordering. The engine code should also be confirmed. Different Mercedes-Benz M270 engine variants may use different intake arrangements. A shared engine family does not guarantee that every component is interchangeable. The replacement must match the intended air filter housing. Its dimensions and sealing arrangement should correspond to the required component. The actual Stokes Germany product specification should be checked. The packaging should identify the relevant OEM replacement reference. An incorrectly sized filter should not be installed. The technician should inspect the airbox before fitting the replacement. Dust and loose debris should be removed according to the applicable service procedure. The filter should be seated securely without modification. Its sealing edges should contact the intended housing surfaces. The housing cover should be closed correctly. Any retaining clips should be secured. Disturbed intake connections should be checked after installation. A new filter cannot repair a defective turbocharger or intake sensor. Existing engine performance faults may require separate diagnosis. JK Automotive customers should verify A2700940004 against their vehicle VIN. Correct fitment supports the intended engine intake filtration function.
Is A2700940004 a genuine Mercedes-Benz OEM reference?
A2700940004 is an original Mercedes-Benz engine air filter part reference. Mercedes-Benz lists this reference in its official original-parts catalogue. The manufacturer identifies it as an engine air filter element. Its published application information includes vehicles from the CLA 117 series. The reference is therefore useful when identifying replacement filters for compatible Mercedes-Benz models. However, an original part reference should not be confused with the brand of the replacement being purchased. The product offered in this listing is branded Stokes Germany. It should be described as an aftermarket replacement rather than a genuine Mercedes-Benz-manufactured filter. An aftermarket product can use an OEM reference to indicate its intended application. That reference alone does not establish identical filtration media or performance characteristics. The actual Stokes Germany technical specifications should be checked independently. The filter's dimensions must match the intended airbox. Its sealing edges must also fit the housing correctly. The product is listed for Mercedes-Benz CLA Coupe C117 CLA 200 117.343. The supplied year range is 2013 – 2019. Independent filter catalogues associate this application with the M270.910 engine. The vehicle VIN should still be checked before ordering. The existing filter reference may provide useful supporting information. However, the old component should not be the only source of verification. The product packaging should be compared with the required replacement specification. The technician should inspect the airbox before installation. The new filter should be seated securely. Housing covers and retaining clips should be refitted correctly. The filter should not be trimmed or modified. Correct installation helps ensure incoming air passes through the intended filtration media. A new filter cannot independently increase engine horsepower. It also cannot repair unrelated engine faults. Customers should distinguish OEM-reference compatibility from genuine Mercedes-Benz branding. JK Automotive should clearly identify Stokes Germany as the aftermarket brand. Accurate product identification supports informed purchasing decisions.
Can replacing the CLA200 air filter improve fuel efficiency?
Replacing a heavily contaminated engine air filter may help restore the intended intake airflow when the existing element has become significantly restricted. The Mercedes-Benz CLA 200 petrol engine requires a suitable supply of air for combustion. The air filter captures specified airborne particles entering the intake system. As dust accumulates, resistance through the filter media may increase. Excessive restriction can affect airflow under certain operating conditions. Replacing the filter with a correctly specified element can remove that source of restriction. However, improved fuel economy should not be guaranteed. Modern engine management systems adjust fuel delivery according to operating conditions. Fuel consumption depends on driving behaviour, traffic and vehicle condition. Tyre pressure and maintenance condition can also affect efficiency. Engine sensor faults may influence combustion control. Ignition system problems can reduce engine efficiency. Fuel delivery faults may also contribute to poor performance. Turbocharger-related issues can affect engine responsiveness. Therefore, a new air filter is not a guaranteed solution for high fuel consumption. The existing filter should be inspected before recommending replacement. The correct replacement must be selected using the vehicle VIN. OEM A2700940004 is associated with selected Mercedes-Benz CLA 117 engine air filter applications. The listed CLA 200 117.343 uses the M270.910 engine. The actual Stokes Germany filter specification should match the required housing. Its sealing edges must fit correctly. An incorrectly seated filter may permit unwanted bypass airflow. The technician should inspect the airbox for debris. The replacement should be installed without modification. Housing covers and retaining clips should be secured. Any disturbed intake connections should be checked. Persistent fuel consumption problems may require diagnostic testing. A new filter cannot repair defective injectors or engine sensors. Its primary purpose is maintaining the intended engine air filtration function. Customers should select the filter on the basis of confirmed fitment and maintenance requirements.
Is this air filter suitable for Mercedes CLA180 and CLA250?
Mercedes-Benz uses the OEM reference A2700940004 across several selected vehicle applications within its petrol engine range. The manufacturer's original-parts information includes multiple CLA 117 variants. Independent filter catalogues also identify the M270 engine family in CLA 180 and CLA 250 applications. However, compatibility should be checked individually for each vehicle. The supplied product title specifically identifies the CLA Coupe C117 CLA 200 117.343. It should not automatically be expanded to every CLA model. Different engine configurations can have different intake arrangements. Production revisions may also affect parts selection. The CLA 180 and CLA 200 commonly use variants of the M270.910 engine. Certain CLA 250 models use the M270.920 engine. These distinctions are important for accurate parts identification. The VIN should be checked against the required air filter reference. The engine code should also be confirmed. The actual Stokes Germany product application list should be reviewed. A filter may be suitable for several models when the manufacturer specifies the same replacement. However, a shared OEM reference must be supported by reliable catalogue information. The filter's dimensions and sealing arrangement must match the intended airbox. A visually similar component may not provide the correct fit. The existing filter can assist identification. Nevertheless, the old component should be checked against authoritative parts data. The replacement should not be forced into an incompatible housing. The technician should inspect the airbox before installation. Any accumulated debris should be removed appropriately. The new filter should be seated securely. Housing covers and clips should be refitted correctly. Disturbed intake connections should be checked. The filter cannot repair existing engine management problems. Customers should not assume compatibility based only on the CLA model name. JK Automotive should publish additional vehicle applications only after verifying them. VIN-based confirmation provides the appropriate basis for final fitment selection.
Where can I buy the Mercedes CLA200 air filter online in India?
Customers can review the Stokes Germany Air Filter for Mercedes-Benz CLA Coupe (C117) CLA 200 (117.343) through JK Automotive's online automotive spare-parts website. The product is listed with OEM reference A2700940004. The supplied vehicle year range is 2013 – 2019. JK Automotive's existing product listing identifies the item as SKU ST1229. The listing identifies Stokes Germany as the product brand. The reference A2700940004 is also recognised in Mercedes-Benz original-parts information. Independent filter catalogues associate the CLA 200 117.343 application with the M270.910 engine. Customers should verify the VIN before ordering. The engine code can provide additional confirmation. The replacement must match the designated air filter housing. Its dimensions and sealing arrangement should be suitable for the vehicle. The actual Stokes Germany product specifications should be checked. Customers should confirm the package contents and quantity. Buyers can visit
https://jkautomotive.co.in/ to review the relevant product. Current price and stock availability should be checked before checkout. Delivery options may depend on the customer's destination. Shipping charges should be reviewed during checkout. No particular dispatch timeframe should be assumed without current confirmation. The received product should be inspected before installation. The packaging should match the verified replacement reference. Any discrepancy should be resolved before servicing begins. The technician should inspect the airbox for debris. The replacement should be seated securely without modification. Housing covers and retaining clips should be correctly refitted. Existing engine faults may require separate diagnosis. A new air filter cannot guarantee improved horsepower or fuel economy. Customers should retain their purchase and maintenance records. Accurate fitment verification helps prevent incorrect orders. JK Automotive buyers should prioritise confirmed compatibility and verified product specifications.
Reviews
There are no reviews yet.