Lemförder Germany Front Shock Absorber Mounts with Bearings Set for Mercedes-Benz CLA-Class C117 are premium front suspension support components designed to secure the upper section of the front shock absorber or strut assembly to the vehicle body while allowing controlled suspension movement and smooth steering rotation. This product carries Lemförder part number 37069 01 and corresponds with OEM reference A2463230020. The front shock absorber mount forms an important connection between the suspension strut and the chassis because it supports the upper section of the strut while helping isolate vibration and road impact from the passenger compartment. The bearing incorporated into the mounting system allows the strut assembly to rotate as the steering wheel is turned, helping the front wheels move smoothly without forcing the coil spring to twist unnecessarily. On the Mercedes-Benz CLA-Class C117, the front suspension experiences continuous vertical movement, steering input, braking forces and road impacts, so the condition of the mount and bearing directly influences steering refinement and suspension noise. As the original mount ages, the rubber can crack, compress or deteriorate, while the bearing can become rough, noisy or resistant to movement. This may cause knocking, creaking, grinding, vibration or a notchy steering sensation. Excessive movement at the top of the strut can also make the front suspension feel less precise. Lemförder 37069 01 should therefore be matched carefully with OEM A2463230020 and verified against the specific Mercedes-Benz CLA-Class C117 application before installation. The vehicle VIN and suspension specification should be checked because different variants can use different front suspension components. The existing mounts should be inspected for cracked rubber, deformation, bearing roughness or excessive play. The front shock absorbers, coil springs, bump stops, dust boots and related suspension components should also be checked while the strut assembly is dismantled. Professional installation is strongly recommended because the front coil spring is under significant tension and requires suitable spring-compression equipment. Correct orientation of the mount and bearing is also important for proper steering and suspension operation. After installation, the steering should rotate smoothly without abnormal noise or resistance. When correctly matched and installed, Lemförder 37069 01 can help restore proper strut support, reduce front-end noise and maintain the refined suspension behaviour expected from the Mercedes-Benz CLA-Class C117.

Worn front shock absorber mounts and bearings in a Mercedes-Benz CLA-Class C117 can cause several noticeable symptoms because these components support the front strut assembly and allow it to rotate correctly during steering. One of the most common symptoms is a knocking or clunking noise from the front suspension when the vehicle travels over bumps, potholes, speed breakers or rough surfaces. This can occur when the rubber mount becomes cracked, compressed or loose enough to allow excessive strut movement. Another common symptom is creaking, grinding, clicking or a spring-like popping sound when the steering wheel is turned, particularly at low speed or during parking manoeuvres. A worn or partially seized bearing may prevent the strut from rotating smoothly, causing the coil spring to twist and release rather than moving freely. The steering can also feel notchy, resistant or inconsistent if the bearing develops roughness. Vibration may be transmitted into the vehicle body if the mount loses its ability to isolate suspension movement effectively. Excessive movement at the upper strut connection can also contribute to a less precise front suspension feel. In some cases, noise may become more noticeable while turning the steering with the vehicle stationary because the bearing is under load. Lemförder 37069 01 corresponds with OEM A2463230020 for compatible Mercedes-Benz CLA-Class C117 applications and may be suitable when the original components are confirmed worn. However, similar symptoms can also be caused by shock absorbers, broken springs, stabilizer links, control-arm bushes, ball joints or steering components, so the complete front suspension should be inspected. The mount should be checked for cracked or separated rubber, while the bearing should be evaluated for rough rotation, resistance or noise. Both sides of the front suspension should be inspected because the mounts and bearings often experience similar mileage and road conditions. The shock absorbers, springs, dust boots and bump stops should also be checked while access is available. If the mounts and bearings are worn, replacing them with correctly matched parts can help reduce noise and restore smoother steering movement. Professional installation is important because the spring must be compressed safely during the repair. After replacement, the steering should be checked through its full range and the vehicle should be road-tested. Maintaining healthy front mounts and bearings is therefore important for steering smoothness, vibration isolation and overall front suspension refinement on the Mercedes-Benz CLA-Class C117.

Lemförder 37069 01 front shock absorber mounts with bearings for Mercedes-Benz CLA-Class C117 are designed to support the upper end of the front strut assembly, isolate road vibration and allow the strut to rotate smoothly during steering. This product corresponds with OEM reference A2463230020 for compatible applications and forms an important connection between the suspension assembly and the vehicle body. The rubber section of the mount helps absorb vibration and impact forces before they are transferred into the passenger compartment. At the same time, the bearing allows the front strut to turn together with the steering system. Without a properly functioning bearing, the strut and coil spring may resist rotation, which can create creaking, grinding, popping or a rough steering feel. The mount also helps maintain the correct upper position of the strut assembly and limits excessive movement under braking, cornering and road impacts. On the Mercedes-Benz CLA-Class C117, these functions are important because the front suspension must combine ride comfort with precise steering response and controlled wheel movement. As the mount deteriorates, the rubber can lose its ability to control vibration and position the strut securely. If the bearing becomes worn or damaged, steering rotation can become rough or noisy. Lemförder 37069 01 should therefore be matched carefully with OEM A2463230020 and verified against the specific vehicle before installation. Vehicle VIN and suspension specification should be checked because different applications can use different mounting systems. The mount should also be considered as part of the complete strut assembly rather than an isolated component. The shock absorber, coil spring, bump stop and dust boot should all be inspected when the strut is removed. If the shock absorber itself is leaking or weak, replacing only the mount may not resolve the complete suspension problem. Professional installation is important because the front spring must be compressed safely. The bearing and mount should be installed in the correct orientation and all fasteners tightened according to the appropriate Mercedes-Benz workshop procedure. Once correctly fitted, the strut should rotate smoothly as the steering is operated. When functioning properly, Lemförder 37069 01 helps support the suspension, reduce vibration and maintain smooth steering behaviour in the Mercedes-Benz CLA-Class C117.

Lemförder 37069 01 front shock absorber mounts with bearings are associated with compatible Mercedes-Benz CLA-Class C117 front suspension applications and correspond with OEM reference A2463230020, but final compatibility should always be verified before purchase or installation. The Mercedes-Benz CLA-Class C117 was produced with different engines, drivetrains, equipment specifications and suspension configurations, and these differences can affect the exact front strut mount or bearing required. For this reason, the CLA-Class C117 designation alone should not be treated as complete fitment confirmation. The vehicle VIN should be checked together with the original OEM number on the existing component. OEM A2463230020 should be compared carefully with the vehicle before Lemförder 37069 01 is installed. The original mount and bearing should also be compared with the replacement for overall dimensions, mounting arrangement, bearing design and orientation. Suspension mounts can appear similar while differing in height, internal construction or mounting geometry, so visual similarity alone is not sufficient. A Mercedes-Benz workshop or experienced parts specialist can use VIN-based data to confirm the exact application. It is also important to check whether the vehicle has a particular suspension package that may require different components. The complete front strut assembly should be inspected before installation. The shock absorber, spring, bump stop and dust boot should all be evaluated because replacing the mount alone will not correct faults elsewhere in the assembly. Both front sides should be inspected because similar wear may exist on the opposite mount and bearing. Mounting points and hardware should be checked for corrosion, deformation or damaged threads. Professional installation is strongly recommended because the front coil spring must be compressed safely before the mount can be replaced. The bearing should rotate smoothly and the assembly should be fitted in the correct orientation. If OEM A2463230020 matches the vehicle and all application checks are satisfied, Lemförder 37069 01 can provide a premium replacement solution for the Mercedes-Benz CLA-Class C117. Correct VIN and OEM verification therefore provide the most reliable method of confirming compatibility.

Yes, worn front shock absorber mounts and bearings can cause knocking, clunking, creaking, grinding and other steering-related noises in a Mercedes-Benz CLA-Class C117 because these components support the upper strut assembly and allow it to rotate as the steering wheel is turned. When the rubber section of the mount becomes cracked, compressed or separated, the strut can develop excessive movement at the upper mounting point. This can create a knocking or clunking sound when the vehicle travels over bumps, potholes or uneven roads. If the bearing becomes worn, rough or partially seized, it may not allow the strut to rotate smoothly during steering. This can produce creaking, grinding, clicking or a spring-like popping noise. The driver may also feel resistance or a notchy sensation through the steering wheel if the bearing binds. In some cases, the coil spring twists as steering input is applied and then suddenly releases because the bearing is not rotating freely. A deteriorated mount can also transmit more vibration into the vehicle body because the rubber no longer isolates road shock as effectively. Excessive strut movement can make the front suspension feel less precise and may reduce the refined feel expected from the Mercedes-Benz CLA-Class C117. Lemförder 37069 01 corresponds with OEM A2463230020 for compatible applications and may be suitable when the original mount and bearing are confirmed worn. However, similar noises can also be produced by stabilizer links, control-arm bushes, ball joints, steering components, shock absorbers or broken springs, so the fault should be diagnosed carefully. The mount should be checked visually for deterioration and the bearing should be checked for roughness or resistance during rotation. Both sides of the front suspension should be inspected because similar wear can develop on the opposite side. The shock absorbers, springs, bump stops and dust boots should also be examined while the strut is dismantled. If the mount and bearing are worn, replacement can help reduce noise and restore smoother steering movement. Professional installation is important because the coil spring must be compressed safely. Once fitted correctly, the steering should move smoothly and the front suspension should operate without abnormal upper-strut movement. Maintaining healthy mounts and bearings therefore contributes directly to steering refinement, ride comfort and front suspension quality in the Mercedes-Benz CLA-Class C117.

Lemförder Germany 37069 01 front shock absorber mounts with bearings are a premium replacement option for compatible Mercedes-Benz CLA-Class C117 applications corresponding with OEM reference A2463230020. Front strut mounts and bearings are important suspension components because they must support the upper strut assembly, isolate road vibration and allow smooth steering rotation through repeated suspension and steering cycles. Choosing a quality replacement is therefore important when restoring front suspension refinement and steering behaviour. Lemförder is widely recognised for European steering and suspension components and is commonly selected by workshops and vehicle owners seeking premium replacement parts. A correctly functioning front mount helps hold the strut securely while absorbing some of the vibration transferred between the suspension and the vehicle body. The bearing allows the strut to rotate with the steering system without binding or forcing the spring to twist unnecessarily. When the original mount or bearing becomes worn, the Mercedes-Benz CLA-Class C117 can develop knocking, creaking, vibration or a rough steering feel. Installing a correctly matched Lemförder 37069 01 can help restore smoother strut movement and reduce unwanted noise when the existing components are genuinely worn. OEM A2463230020 should always be checked before installation, and VIN verification is recommended because suspension configurations can vary. Correct application matching is just as important as choosing a premium brand because an incorrectly specified mount can affect strut positioning and steering movement. Professional installation is strongly recommended because the front coil spring must be safely compressed during the repair. The shock absorber, spring, bump stop and dust boot should also be inspected while the assembly is dismantled. Both sides of the front suspension should be evaluated because similar wear may exist on the opposite side. The mount and bearing should be positioned correctly and all fasteners tightened according to the appropriate Mercedes-Benz workshop procedure. After installation, steering movement should be checked for smooth operation and absence of abnormal noise. If the vehicle application is confirmed and OEM A2463230020 matches the original component, Lemförder 37069 01 represents a strong premium replacement option. When installed properly, it can help restore quieter suspension operation, smoother steering rotation and the refined front-end behaviour expected from the Mercedes-Benz CLA-Class C117.

Front shock absorber mounts with bearings on a Mercedes-Benz CLA-Class C117 are generally best inspected together and are often replaced in pairs when both sides have similar mileage, age and wear, although replacing both sides is not mandatory if only one mount is actually defective. Lemförder 37069 01 corresponds with OEM A2463230020 for compatible Mercedes-Benz CLA-Class C117 applications and should be selected only after the vehicle VIN, original component number and suspension specification are verified. The left and right front mounts operate under similar conditions and are exposed to repeated steering movement, suspension travel, braking loads and road impacts, so deterioration can occur on both sides over time. If one mount has cracked rubber, excessive movement or a noisy bearing while the opposite side remains in good condition, replacing only the failed side may be acceptable. However, if both mounts show similar ageing, rough bearing movement, cracking or noise, replacing them together can help restore more balanced steering and suspension behaviour. Uneven mount or bearing condition from side to side can contribute to different steering resistance, noise or vibration between the left and right front suspension. The entire front strut assembly should therefore be inspected before deciding on replacement. Shock absorbers, springs, bump stops and dust boots should also be checked because faults in these components can create similar symptoms. Mounting points and hardware should be inspected for corrosion, deformation or damaged threads. Professional installation is important because the front coil spring must be compressed safely before the mount and bearing are removed. Lemförder 37069 01 should be installed in the correct orientation and all hardware tightened according to the appropriate Mercedes-Benz workshop procedure. If the repair disturbs suspension geometry, wheel alignment should be checked afterward. Once installed correctly, the steering should operate smoothly without abnormal creaking, grinding or spring noise. If both original mounts have comparable wear, replacing them together can reduce the likelihood of a second repair shortly afterward. If one side remains healthy, replacing only the worn side can still be appropriate. The final decision should therefore be based on actual inspection results rather than automatically replacing both sides.

If worn front shock absorber mounts and bearings are not replaced on a Mercedes-Benz CLA-Class C117, front suspension noise, steering roughness and unwanted strut movement can gradually become more noticeable. The mount supports the upper part of the front strut assembly and helps isolate vibration between the suspension and body, while the bearing allows the strut to rotate smoothly as the steering wheel is turned. When the rubber section of the mount deteriorates, the strut can develop excessive movement at its upper mounting point. This may create knocking or clunking when the vehicle travels over bumps, potholes or uneven surfaces. If the bearing becomes rough, worn or partially seized, the strut may no longer rotate freely during steering. The driver can then notice creaking, grinding, clicking or a spring-like popping sound. Steering may also feel notchy, resistant or inconsistent because the spring can twist instead of rotating smoothly with the bearing. Continued driving with worn mounts can increase the amount of vibration transmitted into the passenger compartment and reduce the refined suspension feel expected from the Mercedes-Benz CLA-Class C117. A damaged bearing may also create additional stress on the spring and related strut components. If the mount develops significant play, the upper strut position can become less stable during braking and cornering. Lemförder 37069 01 corresponds with OEM A2463230020 for compatible applications and may be suitable when replacement is required after correct fitment verification. The complete front suspension should be inspected because similar symptoms can also be caused by worn shock absorbers, broken springs, stabilizer links, control-arm bushes or steering components. Delaying repair can make noise and steering roughness worse and can complicate diagnosis if additional components begin wearing at the same time. The opposite front mount should also be checked because it may have experienced similar mileage and road conditions. Shock absorbers, springs, dust boots and bump stops should be inspected while the strut is dismantled. Professional replacement is recommended because the front coil spring stores significant energy and must be handled with suitable equipment. After installation, the steering should be checked for smooth operation and the vehicle should be road-tested for remaining suspension noise. Maintaining healthy mounts and bearings is therefore important for steering smoothness, vibration isolation and controlled front strut movement.

Lemförder 37069 01 front shock absorber mounts with bearings can help restore ride comfort and smoother steering operation on a compatible Mercedes-Benz CLA-Class C117 when the original mounts or bearings have become worn. These components correspond with OEM A2463230020 and form the upper connection between the front strut assembly and vehicle body. The rubber section of the mount helps isolate vibration and road shock from the chassis, while the bearing allows the strut assembly to rotate when the front wheels are steered. When the original mount deteriorates, vibration can pass more directly into the vehicle body and the strut can move excessively at its upper attachment point. When the bearing wears or binds, the coil spring may twist during steering rather than rotating smoothly. This can create creaking, popping, grinding or a rough steering feel. Installing a correctly matched Lemförder 37069 01 can help restore a more secure upper strut connection and smoother rotational movement. The result can include reduced front suspension noise, less vibration and more consistent steering response. The mount does not provide damping in the same way as the shock absorber itself, but it supports the strut assembly and influences how vibration and steering movement are transmitted through the suspension. On the Mercedes-Benz CLA-Class C117, correct mount and bearing operation is important because ride quality and steering refinement depend on the complete strut system working correctly. Lemförder 37069 01 should be matched carefully with OEM A2463230020 and verified using the vehicle VIN before installation. The front shock absorbers, springs, bump stops and dust boots should also be inspected because worn components elsewhere can continue to create noise or poor ride quality. Professional installation is important because the spring must be safely compressed and the mount positioned correctly. Both sides of the front suspension should be checked because uneven mount or bearing condition can create different steering behaviour from left to right. After replacement, the steering should turn smoothly without abnormal resistance or spring noise. The front suspension should also feel more refined over bumps when the mount is no longer allowing excessive movement or transmitting unwanted vibration. When correctly matched and installed, Lemförder 37069 01 can therefore help restore quieter suspension operation, smoother steering rotation and the refined front-end behaviour expected from the Mercedes-Benz CLA-Class C117.

Lemförder 37069 01 front shock absorber mounts with bearings should be installed on a compatible Mercedes-Benz CLA-Class C117 using proper workshop procedures because the front strut assembly contains a compressed coil spring and incorrect handling can be dangerous. Before installation begins, the vehicle VIN and OEM reference A2463230020 should be verified carefully to confirm the correct application. The replacement mount and bearing should be compared with the original components for overall dimensions, mounting points, bearing design and orientation. The vehicle should then be raised and supported safely using appropriate workshop equipment. The front wheel should be removed and the strut assembly disconnected according to the appropriate Mercedes-Benz repair procedure. Before removing the upper mount, the coil spring must be compressed using a suitable professional spring compressor. The spring should never be dismantled without proper equipment because it stores substantial energy. Once the spring is safely compressed, the upper retaining hardware can be removed and the original mount and bearing inspected. The technician should check for cracked rubber, collapsed material, rough bearing rotation, deformation or excessive movement. The shock absorber should also be inspected for leakage or reduced damping, while the spring should be checked for cracks, corrosion or incorrect seating. The bump stop and dust boot should be examined and replaced if damaged. Lemförder 37069 01 should then be installed in the correct orientation, ensuring that the bearing and mount seat properly against the spring and strut assembly. The retaining hardware should be tightened according to the appropriate Mercedes-Benz workshop procedure. The spring should then be carefully released from the compressor while confirming that it remains seated correctly in its upper and lower positions. The completed strut assembly should be reinstalled without forcing components into position. Mounting bolts and surrounding attachment points should be checked for damaged threads or corrosion. The same inspection should be performed on the opposite side because similar wear may exist there. After reassembly, the steering should be turned through its full range to confirm smooth movement without binding, creaking or spring noise. A road test should then be performed to verify that knocking or vibration has improved. Wheel alignment should be checked if the repair procedure affects suspension geometry. Correct installation is essential because an incorrectly positioned mount or bearing can create noise, steering resistance or premature wear. When Lemförder 37069 01 is correctly installed on a Mercedes-Benz CLA-Class C117 matching OEM A2463230020, it can help restore proper strut support, smoother steering rotation and refined suspension operation.

Lemförder is widely regarded as a premium replacement choice for Mercedes-Benz suspension mounts because of its strong reputation in European steering and suspension applications and its focus on components where accurate fitment, rubber characteristics and bearing operation are important. For the Mercedes-Benz CLA-Class C117 application using Lemförder 37069 01 and OEM reference A2463230020, the main considerations are correct mount geometry, vibration isolation, bearing smoothness and durability under repeated suspension and steering movement. FEBI is also a recognised European aftermarket supplier with a broad range of suspension mounts, bushes and related components. Meyle offers a wide selection of chassis products and may provide alternative or reinforced solutions for certain applications. Sachs is highly respected for shock absorbers, struts and suspension damping components and may also offer associated mounting components depending on the application. None of these brands should automatically be considered poor quality simply because Lemförder is selected. The correct comparison should focus on exact application, OEM cross-reference, component design and fitment accuracy. Lemförder remains especially popular among specialists working on European vehicles because of its long association with chassis and suspension components. For a front strut mount, accurate rubber stiffness and smooth bearing operation are important because the component must isolate vibration while still allowing the strut to rotate freely. A mount that is too soft, incorrectly dimensioned or fitted with a poor bearing can affect steering feel and increase suspension noise. Lemförder 37069 01 should therefore be selected only after confirming OEM A2463230020 and the vehicle VIN. Installation quality is equally important because the mount and bearing must be positioned correctly within the strut assembly. The coil spring must also be seated properly and handled using suitable compression equipment. Even a premium mount can perform poorly if the shock absorber, spring, bump stop or dust boot is damaged. The complete strut assembly should therefore be inspected during the repair. FEBI, Meyle and Sachs can all be valid alternatives when the exact application is available, but the final choice should be based on precise fitment and suspension requirements rather than brand name alone. Lemförder remains a strong option for owners and workshops seeking a premium front strut mounting solution for the Mercedes-Benz CLA-Class C117. When correctly matched and professionally installed, Lemförder 37069 01 can help maintain smooth steering movement, reduced vibration and refined front suspension behaviour.