What is the Stokes Germany Hydraulic Filter Kit for Mercedes-Benz CLK 350?
The Stokes Germany Hydraulic Filter Kit for Mercedes-Benz CLK (C209) CLK 350 (209.356) is an automatic transmission filtration replacement component advertised for the specified vehicle application covering 2003 – 2009. The product carries OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095. Its primary function is to help remove circulating contaminants and microscopic wear particles from automatic transmission fluid within a compatible gearbox filtration circuit. Automatic transmissions depend on controlled hydraulic pressure, proper lubrication, and coordinated mechanical operation to engage gears and transfer engine power. During normal driving, transmission fluid circulates through internal components while experiencing variations in temperature and mechanical load. Over time, small particles may enter the fluid through ordinary component wear and other contamination sources. A correctly specified hydraulic filter helps capture particles within its designed filtration range, reducing their circulation through sensitive transmission components. This function is particularly relevant to hydraulic control assemblies, valves, and other components that depend on clean transmission fluid. The OEM reference A1402770095 is associated with the Mercedes-Benz 722.6 automatic transmission filter family, but customers must confirm that their vehicle is equipped with the corresponding transmission. Different Mercedes-Benz CLK configurations may use different automatic gearbox systems and filter arrangements. Therefore, the advertised vehicle model and year range should not be considered sufficient proof of compatibility. Customers should verify the vehicle identification number, gearbox designation, and original filter reference before ordering. The exact package contents should also be checked because transmission filter kits may contain different combinations of filters, gaskets, and installation accessories. Professional installation is recommended to ensure that the correct filter is fitted and the appropriate transmission servicing procedures are followed. A replacement filter supports transmission maintenance but cannot independently repair worn clutches, defective hydraulic controls, or internal mechanical damage. JK Automotive offers this Stokes Germany product for customers requiring a replacement filtration component matched to their verified Mercedes-Benz transmission specification.
Why is a hydraulic transmission filter important for Mercedes-Benz CLK 350?
A hydraulic transmission filter is an important component in maintaining the cleanliness of automatic transmission fluid in a compatible Mercedes-Benz CLK (C209) CLK 350 (209.356). Automatic transmissions contain mechanical and hydraulic assemblies that work together to manage gear engagement, torque transfer, lubrication, and heat distribution. Transmission fluid performs multiple functions and must circulate through designated passages under appropriate operating conditions. During normal use, microscopic wear particles may originate from internal mechanical components and become suspended in the transmission fluid. Additional contamination can sometimes enter during improper servicing or component replacement. A properly specified filter helps capture contaminants within its designed filtration capability and prevents excessive amounts of unwanted particles from circulating through the affected hydraulic system. Maintaining appropriate fluid cleanliness is particularly important for components containing precisely manufactured surfaces and narrow passages. Contamination may contribute to increased wear or interfere with the operation of sensitive hydraulic components. The Stokes Germany Hydraulic Filter Kit advertised under OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095 is intended for the corresponding verified transmission application. The main Mercedes-Benz reference is associated with a filter used in the 722.6 transmission family, which requires the correct filter design and service components. Before installation, a technician should verify whether the vehicle actually uses that gearbox. A hydraulic filter must provide both appropriate filtration and suitable fluid flow for the gearbox. An incorrect or improperly fitted filter may create sealing or fluid circulation problems. Routine transmission maintenance should also consider fluid condition, manufacturer-approved lubricant specifications, and the condition of associated seals. If the gearbox develops warning messages, abnormal shifting behavior, or unusual noises, professional diagnosis is recommended. These symptoms may originate from several different mechanical, electronic, or hydraulic faults rather than filtration alone. When correctly selected and installed, a transmission filter helps maintain the system's intended filtration function. Suitable servicing practices and appropriate component selection are essential for responsible Mercedes-Benz automatic transmission maintenance.
Is this Stokes Germany Hydraulic Filter compatible with Mercedes-Benz CLK 350 from 2003 – 2009?
The Stokes Germany Hydraulic Filter Kit is advertised for Mercedes-Benz CLK (C209) CLK 350 (209.356), covering the supplied model years 2003 – 2009 and carrying OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095. However, compatibility depends on the actual automatic transmission installed in the vehicle rather than solely on its commercial model designation or year of manufacture. The main reference A1402770095 is associated with the Mercedes-Benz 722.6 five-speed automatic transmission filtration system. Different Mercedes-Benz CLK vehicles may have varying gearbox specifications depending on their manufacturing dates, engine variants, equipment configurations, and technical revisions. A filter intended for the 722.6 gearbox should not automatically be treated as interchangeable with a filter for another automatic transmission. The most reliable starting point for compatibility confirmation is the vehicle identification number, commonly called the VIN or chassis number. The VIN can be used with appropriate manufacturer parts information to identify the original transmission configuration and required service components. Customers should also verify the transmission code where possible because a gearbox may have been replaced during previous repairs. The original filter number can provide additional information when the transmission has already been opened for servicing. Before purchase, customers should confirm the correct filter dimensions, mounting arrangement, and associated sealing requirements. The supplied references include numbers associated with other vehicle manufacturers using related transmission components, but cross-reference information must always be interpreted according to the actual gearbox application. The Stokes Germany product should be selected only when its confirmed technical specification matches the required filter. Installing an unsuitable component could lead to fitting difficulties, incorrect sealing, or transmission servicing problems. Professional verification before ordering helps reduce the possibility of purchasing an incompatible product. Customers should also establish whether the advertised kit includes the necessary gasket or whether additional components must be purchased separately. Once compatibility is confirmed, the product can be considered for the relevant automatic transmission maintenance procedure. JK Automotive customers should provide their full VIN and gearbox identification when requesting confirmation of this Stokes Germany Hydraulic Filter Kit.
What are the signs of a blocked hydraulic transmission filter in Mercedes-Benz CLK 350?
A blocked, damaged, or incorrectly installed hydraulic transmission filter may contribute to automatic gearbox operating problems in a compatible Mercedes-Benz CLK (C209) CLK 350 (209.356), depending on the affected hydraulic circuit and the severity of the condition. Automatic transmissions rely on properly controlled transmission fluid circulation to support lubrication and hydraulic operation. As a filter accumulates contaminants over time, resistance to fluid flow may increase. If the restriction becomes excessive, it may affect fluid circulation within the applicable gearbox system. Some drivers may notice delayed engagement, unusual shifting behavior, hesitation when selecting gears, or inconsistent transmission response. In certain circumstances, abnormal gearbox noises or warning messages may also prompt investigation. However, these symptoms cannot reliably identify a blocked hydraulic filter without professional diagnosis. Similar complaints may arise from incorrect transmission fluid levels, deteriorated lubricant, hydraulic pressure concerns, electronic control faults, worn clutch components, or internal mechanical damage. A qualified transmission technician should inspect the vehicle and determine the actual cause. Diagnostic work may include reviewing gearbox fault codes, examining transmission operating conditions, checking fluid condition, and inspecting relevant components. If the transmission is opened for servicing, accumulated debris or damage to the existing filter may provide useful information. The Stokes Germany Hydraulic Filter Kit identified by OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095 should only be installed after confirming the correct gearbox specification. The main Mercedes-Benz reference is associated with the 722.6 transmission family and should not be used as a universal replacement for every CLK 350 transmission. During replacement, technicians should prevent foreign particles from entering the gearbox and inspect associated seals. The correct manufacturer-approved automatic transmission fluid must be used according to the applicable service requirements. Following installation, the gearbox should be inspected for leaks and correct operation. A replacement filter cannot reverse existing mechanical damage or guarantee that shifting concerns will disappear. Proper diagnosis and suitable servicing practices remain essential when maintaining the automatic transmission.
How does the Stokes Germany Hydraulic Filter Kit help protect the automatic gearbox?
The Stokes Germany Hydraulic Filter Kit helps maintain the filtration of automatic transmission fluid in compatible gearbox applications requiring the specified replacement component. Automatic transmissions contain moving gears, bearings, clutch assemblies, hydraulic valves, and other components that depend on suitable lubrication and controlled fluid movement. As the transmission operates, small wear particles may enter the fluid and circulate through internal passages. A correctly specified hydraulic filter helps retain contaminants within its designed filtration range and reduces their movement through sensitive hydraulic components. This filtration function supports the cleanliness of transmission fluid and the maintenance of appropriate operating conditions. The Stokes Germany Hydraulic Filter Kit is advertised with OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095 for the listed Mercedes-Benz CLK (C209) CLK 350 (209.356) application. The supplied model-year range is 2003 – 2009, although the exact transmission specification must be verified. Reference A1402770095 is associated with the 722.6 automatic transmission filtration system, and the replacement component must correspond to the gearbox actually installed. Proper fluid filtration can help limit contamination-related wear, but filtration is only one element of transmission maintenance. Suitable transmission fluid, correct fluid levels, healthy seals, and properly functioning mechanical and electronic components are equally important. If an existing filter becomes damaged or excessively restricted, replacement with the correct component may restore the intended filtration function. However, a new filter cannot repair worn clutch assemblies, damaged valve bodies, faulty sensors, or internal gearbox failures. Professional installation should include inspection of the existing filter arrangement and surrounding components. Technicians should confirm whether a new gasket or additional service components are required during replacement. Correct fluid filling and post-service inspection must follow the relevant gearbox servicing instructions. When properly matched and installed, the replacement filter contributes to maintaining the transmission's intended fluid filtration system. Customers purchasing through JK Automotive should prioritise compatibility verification, appropriate maintenance intervals, and qualified workmanship. The Stokes Germany Hydraulic Filter Kit is a replacement maintenance component rather than a guaranteed transmission performance upgrade.
When should the hydraulic transmission filter be replaced in Mercedes-Benz CLK 350?
The replacement interval for a hydraulic transmission filter in Mercedes-Benz CLK (C209) CLK 350 (209.356) should follow the maintenance specifications applicable to the gearbox installed in the vehicle. Automatic transmission filters are designed to capture contaminants from circulating transmission fluid, but replacement requirements can vary by gearbox model, service history, driving conditions, and technical configuration. During normal driving, transmission components experience mechanical movement, changes in temperature, and repeated hydraulic operation. Small particles may gradually accumulate within the filtration system as the gearbox operates. Over time, excessive contamination can affect the condition of the filter and transmission fluid. The Stokes Germany Hydraulic Filter Kit is advertised for the specified CLK 350 application covering 2003 – 2009, with OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095. The main Mercedes-Benz reference is associated with the 722.6 automatic transmission family, but that gearbox must be confirmed before selecting the filter. Customers should not assume that every CLK 350 uses identical transmission servicing components. A qualified technician should identify the gearbox code and consult the appropriate Mercedes-Benz maintenance instructions. Vehicles frequently operated in heavy traffic or demanding conditions may require particular attention to transmission servicing, although these conditions do not independently establish a replacement interval. During maintenance, the technician should inspect transmission fluid condition, check for leaks, and examine relevant sealing components. If excessive contamination or abnormal debris is discovered, further gearbox diagnosis may be required. Replacing the filter without investigating significant internal contamination may not resolve the underlying issue. The correct manufacturer-approved automatic transmission fluid should be used according to the gearbox specifications. Proper filling and checking procedures are essential because incorrect fluid levels can affect transmission operation. A new filter helps maintain the intended filtration function but does not guarantee longer transmission life or repair existing mechanical faults. Regular servicing based on verified technical information remains important for reliable vehicle maintenance. Customers should confirm the applicable gearbox and replacement component before purchasing the Stokes Germany Hydraulic Filter Kit from JK Automotive.
Can a faulty hydraulic filter cause gear shifting problems in Mercedes-Benz CLK 350?
A faulty, restricted, damaged, or incorrectly installed hydraulic filter may contribute to gear-shifting problems in a compatible Mercedes-Benz CLK (C209) CLK 350 (209.356), depending on the transmission design and the severity of the condition. Automatic gearboxes use hydraulic pressure to support various operating functions, including gear engagement and the control of internal components. Transmission fluid must circulate according to the requirements of the gearbox while providing suitable lubrication and hydraulic characteristics. If the filtration system becomes severely restricted, it may influence fluid flow within the applicable circuit. In some circumstances, the driver may notice delayed engagement, inconsistent shifting, hesitation during acceleration, or unusual transmission behavior. However, these complaints are not specific to a hydraulic filter. Similar symptoms may result from incorrect transmission fluid levels, worn clutch components, hydraulic pressure problems, electrical faults, defective sensors, or internal mechanical damage. A professional diagnostic inspection is necessary before attributing shifting problems to the filtration system. Technicians may review transmission fault codes, inspect fluid condition, and perform gearbox-specific tests. The Stokes Germany Hydraulic Filter Kit advertised under OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095 should be selected only when the vehicle's actual gearbox requires the corresponding component. Reference A1402770095 is associated with the Mercedes-Benz 722.6 automatic transmission filter family. The Mercedes-Benz CLK 350 designation and supplied 2003 – 2009 model-year range do not independently guarantee gearbox compatibility. Customers should check the VIN, transmission code, and original filter reference before ordering. When servicing is necessary, the correct replacement filter should be installed using approved technical procedures. Associated seals and transmission fluid should also be checked according to manufacturer requirements. If shifting problems persist after filter replacement, further diagnosis may be required. A hydraulic filter is a maintenance component and should not be marketed as a guaranteed repair for transmission faults.
Are OEM A1402770095, 52108325AA, 5073878AA and the other listed references interchangeable?
The OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095 are provided for identifying the Stokes Germany Hydraulic Filter Kit advertised for Mercedes-Benz CLK (C209) CLK 350 (209.356), model years 2003 – 2009. Automotive parts manufacturers and aftermarket suppliers use cross-reference catalogues to identify corresponding replacement components sold under different manufacturer numbering systems. The Mercedes-Benz reference A1402770095 is associated with an automatic transmission oil filter used in the 722.6 gearbox family. Several of the additional supplied references are documented as corresponding aftermarket or vehicle-manufacturer numbers for related filter applications. Such cross-references can help customers identify compatible replacement products when the original component is known. However, the presence of multiple part numbers does not mean that every vehicle using one of the associated manufacturers' components has the same gearbox configuration. Filter suitability depends on the specific transmission, component design, mounting arrangement, and filtration requirements. The reference 52108325AA appears twice in the supplied product identification and has been preserved in the listing information. The references 5073878AA and K52108325AA are also associated with relevant automatic transmission filter cross-reference catalogues. Reference 5021192732 and 14027-70095 should be checked against the applicable supplier records when confirming interchangeability. Customers should not assume that a related reference automatically establishes fitment for every Mercedes-Benz CLK 350. The VIN and gearbox identification remain necessary for accurate component selection. The original filter dimensions and configuration may provide additional evidence during servicing. Customers should also determine whether the Stokes Germany product is supplied as a single filter or as a kit containing additional components. Incorrect filter selection could create fitting, sealing, or fluid circulation concerns. A qualified parts specialist or transmission technician can assist with technical verification before installation. Accurate OEM cross-referencing helps minimise ordering mistakes and supports appropriate automatic gearbox maintenance.
What are the advantages of using the Stokes Germany Hydraulic Filter Kit during transmission servicing?
The Stokes Germany Hydraulic Filter Kit offers a replacement filtration option for compatible automatic transmissions requiring the associated hydraulic filter specification. Transmission fluid circulates through various internal assemblies to provide lubrication and support the gearbox's intended hydraulic functions. During normal operation, small particles generated by mechanical wear can become suspended in the fluid. A correctly specified filter helps capture contaminants within its designed filtration range and limit their circulation through sensitive transmission components. Maintaining suitable fluid cleanliness is important because hydraulic valves, control assemblies, and other precision components can be affected by excessive contamination. The Stokes Germany product is advertised for Mercedes-Benz CLK (C209) CLK 350 (209.356), covering the supplied model years 2003 – 2009. Its OEM references are A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095. The main reference corresponds to a filter associated with the 722.6 transmission family, making gearbox identification essential before installation. A correctly selected replacement may help restore the intended filtration function when an existing filter is damaged, excessively restricted, or requires replacement under the relevant service procedure. However, the benefits of servicing depend on more than the filter alone. Technicians should use the correct transmission fluid, inspect relevant seals, and follow the manufacturer-specified filling procedure. Transmission fluid condition may also provide useful information about gearbox wear or contamination. If substantial metal particles or other abnormal debris are discovered, additional diagnosis may be necessary. A new filter cannot repair existing clutch damage, worn internal components, or defective electronic control systems. It also should not be expected to increase engine power or guarantee improved acceleration. Its primary value is supporting the maintenance of the transmission's designed filtration system. Professional installation and periodic gearbox inspection contribute to responsible vehicle care. JK Automotive provides the Stokes Germany Hydraulic Filter Kit for customers seeking the advertised component after confirming the correct transmission application.
Why buy the Stokes Germany Hydraulic Filter Kit online from JK Automotive India?
Customers searching for a Stokes Germany Hydraulic Filter Kit for Mercedes-Benz CLK (C209) CLK 350 (209.356) can use JK Automotive's online spare-parts platform to identify the advertised replacement product. The listing includes the supplied 2003 – 2009 model-year range and OEM references A1402770095 / 52108325AA / 5073878AA / 52108325AA / K52108325AA / 5021192732 / 14027-70095. Searching by original equipment reference can help customers identify specific transmission maintenance components more accurately than relying exclusively on a general vehicle model search. The main Mercedes-Benz reference is associated with the 722.6 automatic transmission filtration system, but the exact gearbox installed in the customer's vehicle must be verified. Customers should provide their VIN or chassis number and confirm the transmission identification before purchasing. The original filter number can also assist with selecting the appropriate replacement. Mercedes-Benz CLK vehicles may have different gearbox specifications, so a shared model designation does not guarantee interchangeability. Customers should compare the required filter with the advertised Stokes Germany product and review any applicable technical dimensions. The package contents should also be confirmed before ordering, particularly whether a transmission pan gasket or other service accessories are included. Transmission fluid should not be assumed to be supplied unless explicitly stated in the product listing. Once compatibility is confirmed, buyers can review current pricing, availability, and delivery information through JK Automotive's website. The product identification details can be shared with a qualified transmission servicing workshop before installation. Professional technicians should carry out filter replacement according to the relevant manufacturer instructions. The work should include appropriate cleanliness precautions, correct component positioning, and inspection of associated seals. The specified transmission fluid must be used and checked according to the gearbox service procedure. Customers should not regard filter replacement as a guaranteed repair for existing transmission faults. Instead, the product should be treated as a maintenance component intended to support the filtration of automatic transmission fluid. JK Automotive offers this Stokes Germany replacement product for customers seeking the appropriate automatic transmission filter in India, subject to technical verification of the exact vehicle application.
Reviews
There are no reviews yet.