What is the purpose of the Stokes Germany Oil Filter for Mercedes CLA200 CDI?
The Stokes Germany Oil Filter is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 CDI / d (117.308), covering the supplied vehicle years of 2013 – 2019. Its primary purpose is to support the filtration of engine oil circulating through the diesel engine lubrication system. Engine oil forms a protective lubricating film between moving engine components. This helps reduce friction during normal operation. Engine oil also carries heat away from certain internal components. As the engine operates, fine particles may enter the circulating oil. These particles can include metallic wear debris and other contaminants. The oil filter is designed to capture specified particulate contaminants as oil passes through its filtration media. This helps maintain the intended cleanliness of circulating engine oil. Correct oil filtration is an important part of routine diesel engine maintenance. The CLA 200 CDI / d (117.308) is associated with the Mercedes-Benz OM651 diesel engine family. This turbocharged engine requires the correct engine oil and filtration components. The supplied OEM references are A6511800009, A6511800109, A6511840025, 15209-HG00A, 68091826AA, 68091827AA, K68091826AA and K68091827AA. These references are grouped in aftermarket filter cross-reference catalogues. However, the actual Stokes Germany product specifications must be verified before installation. The vehicle VIN should be checked to confirm the required replacement. The engine identification code provides additional information. The filter must match the designated oil filter housing. Its dimensions should correspond to the intended design. Its sealing arrangement should also be suitable. An incorrectly fitted filter may compromise the intended filtration function. Customers should confirm the actual package contents before ordering. The inclusion of replacement O-rings should not be assumed without checking the product. The technician should inspect the filter housing during servicing. Any damaged sealing components should be addressed. The correct Mercedes-Benz engine oil approval must be observed. The filter should be installed according to the applicable service procedure. The housing should be secured using the specified tightening method. The engine oil level should be checked after servicing. The engine should also be inspected for leaks. A new oil filter cannot independently repair worn engine bearings or a defective oil pump. Correct filter selection supports appropriate engine lubrication maintenance.
Is OEM A6511800009 compatible with Mercedes CLA 200 CDI C117?
OEM A6511800009 is associated with a Mercedes-Benz diesel engine oil filter reference family. The supplied product title identifies the Mercedes-Benz CLA Coupe (C117) CLA 200 CDI / d (117.308). The supplied vehicle year range is 2013 – 2019. Independent replacement-filter catalogues list the CLA 200 CDI / d (117.308) among compatible applications for this filter family. The vehicle is associated with the Mercedes-Benz OM651 diesel engine. However, final compatibility should still be confirmed for the individual vehicle. The VIN provides important identification information. The engine code can provide additional confirmation. The supplied title includes A6511800109 and A6511840025. It also includes 15209-HG00A, 68091826AA, 68091827AA, K68091826AA and K68091827AA. These references appear together in aftermarket replacement-filter catalogues. Their grouping supports a cross-reference relationship. However, cross-reference information does not guarantee identical packaging across manufacturers. The actual Stokes Germany filter must match the designated housing. Its dimensions should correspond to the required component. The sealing arrangement should also be suitable. A visually similar filter should not be installed without verification. The existing filter may provide supporting identification information. However, a previously installed component should not be assumed correct without checking. The technician should inspect the oil filter housing before replacement. Any damaged sealing surfaces should be addressed. Required replacement O-rings should be fitted correctly. The filter should be installed in its specified position. The housing should be secured according to the applicable service procedure. The correct engine oil approval must be selected independently. The final engine oil level should be checked. The engine should be inspected for leaks after servicing. Customers should distinguish the CLA 200 CDI / d diesel variant from petrol CLA models. Different engine families may require different oil filters. Accurate VIN-based verification helps reduce incorrect orders. JK Automotive customers should confirm the actual Stokes Germany replacement specifications before purchase.
What are the symptoms of a clogged Mercedes CLA200 CDI oil filter?
A restricted engine oil filter may increase resistance to oil flow when excessive contamination accumulates within its filtration media. The Mercedes CLA 200 CDI / d uses a turbocharged diesel engine with specific lubrication requirements. Engine oil circulates through the lubrication system to protect moving components. The oil filter captures specified particulate contaminants carried by the circulating oil. During normal operation, fine wear debris may gradually accumulate within the filter media. Excessive contamination can increase the resistance of the filtration element. However, the actual effect depends on the engine lubrication system and filter bypass design. An oil pressure warning may indicate a serious lubrication problem. Such warnings can have several possible causes. Insufficient engine oil level may contribute to pressure concerns. Incorrect oil viscosity may also affect lubrication performance. A defective oil pump can create similar symptoms. Internal engine wear may contribute to abnormal oil pressure. Therefore, an oil pressure warning does not automatically prove that the filter is clogged. The driver should follow the vehicle's warning instructions immediately. A critical oil pressure warning may require stopping the engine. The technician should inspect the lubrication system before recommending repairs. The engine oil level should be checked according to manufacturer instructions. The vehicle's service history may provide useful information. The correct engine oil specification should be confirmed. The exact engine should also be identified. The supplied vehicle code is 117.308. The primary OEM reference is A6511800009. The additional supplied references should be verified against the required filter. The actual Stokes Germany replacement must match the designated housing. Its sealing arrangement should be suitable. Required replacement seals should be installed correctly. The housing should be inspected for damage. The engine should be checked for leaks after servicing. Persistent oil pressure concerns require professional diagnosis. A new filter cannot repair worn engine bearings or a defective oil pump. Filter replacement should be treated as maintenance rather than a guaranteed engine repair.
When should the Mercedes CLA200 CDI engine oil filter be replaced?
The engine oil filter should be replaced according to the maintenance requirements applicable to the individual Mercedes-Benz CLA Coupe C117 CLA 200 CDI / d. The supplied vehicle year range is 2013 – 2019. The exact replacement interval should be determined using applicable Mercedes-Benz maintenance information. The vehicle VIN can help identify the correct service specification. The engine identification code should also be confirmed. The CLA 200 CDI / d (117.308) is associated with the OM651 diesel engine family. Engine oil is exposed to heat and mechanical stress during operation. It also carries particulate contaminants through the lubrication system. The oil filter captures specified particles as oil circulates through the filtration media. Over time, contamination may accumulate within the filter. Oil filter replacement is generally performed during an appropriate engine oil service. However, the exact procedure depends on the engine specification. The technician should review the vehicle's previous maintenance history. Driving conditions may influence maintenance requirements. An arbitrary shortened interval should not be presented as an official Mercedes-Benz requirement. The correct replacement filter should be identified before servicing begins. OEM A6511800009 should be checked against the vehicle. The additional references A6511800109 and A6511840025 should also be verified. The remaining supplied references should be checked against reliable cross-reference information. The actual Stokes Germany product specifications must be confirmed. Customers should verify whether replacement O-rings are included. The correct engine oil approval must be selected independently. The technician should inspect the filter housing and sealing surfaces. Required replacement seals should be installed correctly. The housing should be secured using the applicable tightening procedure. The engine should be filled with the correct quantity of approved oil. The final oil level should be checked using the specified method. The engine should be inspected for leaks after servicing. The maintenance reminder should be reset only after the service is completed correctly. Accurate maintenance records support future service planning. Correct engine-specific filter selection is essential for appropriate servicing.
Why choose the Stokes Germany Oil Filter for Mercedes CLA200 CDI?
The Stokes Germany Oil Filter provides an aftermarket replacement option for customers maintaining a compatible Mercedes-Benz diesel engine lubrication system. The product is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 CDI / d (117.308). The supplied vehicle years are 2013 – 2019. Its intended function is to capture specified particulate contaminants circulating through the engine oil. Correct filtration forms part of routine diesel engine maintenance. Engine oil lubricates moving components and helps reduce friction. It also assists with heat transfer and contaminant transport. A correctly specified filter helps maintain the intended cleanliness of circulating oil. However, actual filtration performance depends on verified manufacturer specifications. Customers should not assume a particular filtration efficiency without supporting documentation. Increased engine horsepower should not be guaranteed. Improved fuel economy should also not be promised solely from filter replacement. The supplied primary OEM reference is A6511800009. The additional references are A6511800109, A6511840025, 15209-HG00A, 68091826AA, 68091827AA, K68091826AA and K68091827AA. Independent aftermarket catalogues group these references within the same replacement-filter family. Nevertheless, the actual Stokes Germany product specifications should be verified. The vehicle VIN should be checked before ordering. The engine code provides additional fitment information. The replacement must match the designated oil filter housing. Its dimensions and sealing arrangement should be suitable. Customers should confirm the package quantity and included accessories. Replacement O-rings should not be assumed to be included without verification. Installation should follow the applicable Mercedes-Benz engine oil service procedure. The technician should inspect the filter housing before installation. The correct engine oil approval must be observed. The housing should be secured using the specified method. The engine should be checked for leaks after servicing. A new oil filter cannot repair existing internal engine damage. JK Automotive provides an online platform for automotive replacement parts in India. Customers should review current product details and availability. VIN-based verification helps reduce incorrect orders and unnecessary workshop delays.
Does this oil filter fit the Mercedes CLA200 CDI OM651 engine?
The Stokes Germany Oil Filter is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 CDI / d (117.308). The supplied vehicle years are 2013 – 2019. This vehicle variant is associated with the Mercedes-Benz OM651 diesel engine family. The OM651 uses a pressurised lubrication system to distribute oil to internal engine components. Engine oil helps reduce friction and carries heat away from certain moving parts. The oil filter captures specified particulate contaminants as oil circulates through the lubrication system. The primary supplied OEM reference is A6511800009. Additional references include A6511800109 and A6511840025. The supplied title also includes five further cross-reference numbers. Independent replacement-filter catalogues group these references within the same filter family. They also identify the CLA 200 CDI / d (117.308) among applicable vehicle variants. However, the actual Stokes Germany product specifications must still be checked. The vehicle VIN should be verified before ordering. The engine code provides additional confirmation. The filter must match the designated oil filter housing. Its dimensions should correspond to the required specification. Its sealing arrangement should also be suitable. A filter intended for another engine should not be installed solely because it looks similar. Customers should confirm the actual package contents. The inclusion of replacement O-rings should be checked. The technician should inspect the filter housing before replacement. Any damaged sealing surfaces should be addressed. Required replacement seals should be installed correctly. The correct Mercedes-Benz engine oil approval must be observed. The housing should be secured using the specified tightening procedure. The final oil level should be checked after servicing. The engine should be inspected for leaks. A new oil filter cannot repair worn internal engine components. It also cannot independently correct a defective oil pump. Correct VIN-based fitment verification supports appropriate diesel engine maintenance. JK Automotive buyers should confirm the actual replacement specifications before purchase.
Are all eight supplied OEM references interchangeable?
The supplied product title identifies eight engine oil filter reference numbers. These include three Mercedes-Benz-style references beginning with A651. The remaining numbers are 15209-HG00A, 68091826AA, 68091827AA, K68091826AA and K68091827AA. Independent aftermarket filter catalogues group these references within the same replacement-filter family. This supports a cross-reference relationship for certain applications. However, the references originate from different vehicle manufacturer numbering systems. Their appearance together does not guarantee identical packaging across aftermarket brands. Some filter products include replacement sealing rings. Others may require seals to be obtained separately. The actual Stokes Germany package contents should therefore be confirmed. Customers should verify the number of filter elements supplied. They should also check whether any O-rings are included. The listed vehicle is the Mercedes-Benz CLA Coupe C117 CLA 200 CDI / d 117.308. The supplied vehicle years are 2013 – 2019. The VIN should be checked before ordering. The engine code provides additional identification information. The replacement must match the designated filter housing dimensions. Its sealing arrangement should correspond to the intended design. A visually similar filter should not be installed without verification. The existing filter may provide supporting identification information. However, a previously installed component should not be assumed correct without checking. The technician should inspect the housing before replacement. Damaged sealing surfaces may require additional attention. Required replacement seals should be installed correctly. The specified engine oil approval must be observed. The housing should be secured using the applicable service procedure. The engine should be inspected for leaks after servicing. Customers should distinguish aftermarket cross-reference relationships from confirmed manufacturer supersessions. Accurate parts identification helps prevent incorrect orders. The actual Stokes Germany replacement specifications should be verified before installation.
Does this Stokes Germany oil filter include replacement O-rings?
The supplied Stokes Germany product title identifies an engine oil filter but does not specify the complete package contents. Therefore, customers should confirm whether replacement O-rings are included. Engine oil filter elements may require sealing rings during installation. Some aftermarket filter packages include selected replacement seals. Other products may require these components to be purchased separately. The actual Stokes Germany packaging should be reviewed before ordering. A manufacturer datasheet may provide additional information. Customers should confirm the number of filter elements supplied. They should also verify the quantity and dimensions of any included O-rings. The correct sealing arrangement depends on the engine oil filter housing. The Mercedes CLA 200 CDI / d uses a diesel engine from the OM651 family. Its lubrication system requires correctly specified filtration components. The vehicle VIN should be checked before selecting service parts. The engine identification code provides additional confirmation. The supplied primary reference is A6511800009. The additional references should be checked against the intended replacement. Independent aftermarket catalogues support the grouping of the supplied numbers. However, the actual Stokes Germany package specification must still be confirmed. The replacement filter should match the designated housing. Its dimensions and sealing arrangement must be suitable. The technician should inspect the filter housing before installation. Damaged sealing surfaces should be addressed. Incorrectly sized O-rings should not be installed. Required seals should be fitted in their specified positions. The housing should be secured according to the applicable Mercedes-Benz service procedure. The correct engine oil approval must be used. The final oil level should be checked after servicing. The engine should be inspected for leaks. A new O-ring cannot repair a cracked filter housing. Existing oil leaks may require separate diagnosis. Confirming package contents helps prevent incomplete maintenance work.
Can replacing the oil filter improve Mercedes CLA200 CDI performance?
Replacing an engine oil filter during appropriate maintenance helps maintain the intended lubrication filtration function. The Mercedes CLA 200 CDI / d uses a turbocharged diesel engine with specific lubrication requirements. Engine oil circulates through the engine to lubricate moving components. It also carries heat and contaminants through the lubrication circuit. The oil filter captures specified particulate contaminants as oil passes through its filtration media. During normal operation, contamination may accumulate within the filter. Excessive contamination can increase resistance to oil flow. However, replacing the oil filter does not automatically increase engine horsepower. It also does not guarantee improved acceleration. Engine performance problems can have several possible causes. Fuel injection faults may affect diesel combustion. Turbocharger control problems can reduce available engine power. Exhaust aftertreatment faults may produce similar symptoms. Incorrect engine oil level can contribute to lubrication concerns. Therefore, engine symptoms should be diagnosed before recommending repairs. The technician should review the vehicle's maintenance history. Relevant diagnostic fault codes may provide useful information. The correct engine oil specification should be confirmed. The replacement filter must match the installed engine. The supplied vehicle code is 117.308. The primary OEM reference is A6511800009. The remaining supplied references should be checked against the intended filter. The actual Stokes Germany product specifications must be confirmed. The technician should inspect the filter housing. Required replacement seals should be fitted correctly. The engine oil level should be checked after servicing. The engine should be inspected for leaks. A new filter cannot repair worn internal engine components. It also cannot independently correct a defective turbocharger. Proper filtration maintenance and engine fault diagnosis are separate activities. Customers should treat oil filter replacement as maintenance rather than a performance modification.
Where can I buy the Mercedes CLA200 CDI oil filter online in India?
Customers can review the Stokes Germany Oil Filter through JK Automotive's online automotive spare-parts website in India. The product is listed for the Mercedes-Benz CLA Coupe (C117) CLA 200 CDI / d (117.308). The supplied vehicle years are 2013 – 2019. The OEM references are A6511800009, A6511800109, A6511840025, 15209-HG00A, 68091826AA, 68091827AA, K68091826AA and K68091827AA. Independent aftermarket filter catalogues group these references within the same replacement-filter family. They also list the CLA 200 CDI / d 117.308 application. However, customers should confirm the exact engine before ordering. The vehicle VIN provides important identification information. The engine code can provide additional confirmation. The actual Stokes Germany product specifications should be reviewed. The replacement must match the designated oil filter housing. Its dimensions and sealing arrangement should be suitable. Customers should confirm whether replacement O-rings are included. Engine oil should not be assumed to be part of the filter package. Buyers can visit
https://jkautomotive.co.in/ to review the relevant product. Current pricing and availability should be checked before checkout. Delivery options may vary according to the destination. Applicable shipping charges should be reviewed during checkout. Customers should inspect the received product before installation. The package reference should match the verified replacement requirement. Any discrepancy should be resolved before servicing begins. The technician should follow the applicable Mercedes-Benz engine oil service procedure. The correct engine oil approval must be observed. The housing should be secured using the specified method. The engine should be inspected for leaks after servicing. Existing engine faults may require separate diagnosis. A new oil filter cannot guarantee improved engine performance. Customers should retain their purchase invoice and maintenance records. Accurate VIN-based selection helps reduce incorrect orders and servicing delays. JK Automotive buyers should prioritise verified fitment before completing their purchase.
Reviews
There are no reviews yet.